VIP member
NIVELCO EasyTREK Split Ultrasonic Level Gauge
NIVELCO EasyTREK is a split type, three wire ultrasonic level gauge with a measurement range of up to 60 meters. It also comes with a aiming device th
Product details
NIVELCOEasyTREK split type, three wire systemUltrasonic level gaugeProduct features:
The range is 15 meters/30 meters/60 meters
● PC and HART calibration
4-20mA output+1 relay
Equipped with HART and relay output
● Dust explosion-proof certification is optional
-
The parameters of the split type ultrasonic level gauge are as follows:
Sensor material: Polyurethane probe surface, aluminum shell
Shell material: cast aluminum spray coating
Launch angle: 5 degrees
Process temperature: -30 ℃~+75 ℃
Environmental temperature: STD-300: -30 ℃ to+60 ℃; SBD-300：-25℃～+60℃
Pressure (absolute): 0.7-1.1 bar (0.07-0.11 MPa) ± 0.05 bar (0.05 MPa) Difference between open and closed
Mechanical protection: Sensor: IP65 (NEMA 5)
Shell: IP67 (NEMA 6)
Power supply/power consumption: Voltage I: 120-375VDC/5.5W and 85-255VAC (50/60Hz)/6.8VA
Voltage II: 10.5-40VDC/3.6W and 10.5-28VAC (50/60Hz)/4.6VA
Accuracy: ± (0.2% measurement distance+0.1% range)
Resolution: 10mm
Output: Analog: 4-20mA, 600OHm, isolated, secondary relay protection
Relay: SPDT, 250VAC, 3A, ACI
Number: HART with Eview configuration software; RS485 with Modbus
Electrical connection: 2 × Pg and 2 × 1/2 "NPT line position selection (recommended)
Electrical protection: Class I
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-