Multi layer automatic board splitting machine-Global supplier

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13712542526
Address

No. 6 Hunan Yuan Road, Songshan, Dongguan City

Contact Now

Multi layer automatic board splitting machine

Brand: Zhengye Board Thickness: 0.15-4.0 Copper Thickness: 1/3~4oz

Contact Supplier

More Products

Product details

Multi layer automatic board splitting machine is a fully automatic equipment for dividing laminated boards. In the multi-layer pressing process of printed circuit boards (PCBs), multi panel pressing is often used to improve production. This machine can effectively replace manual work. Through imaging system algorithms, it automatically searches for edges, identifies product assembly lines, and achieves automatic disassembly and edge cutting and recycling through a central control system, effectively improving productivity; Combined with an air cooling system, the laminated board (PCB) is naturally cooled to room temperature, which is more in line with post process operations. 1. Reduce manufacturing costs

The automatic production cycle of multi-layer board splitting machine is very short, and the splitting speed is fast, which can greatly improve the splitting efficiency. At the same time, the splitting machine can operate continuously, thus greatly reducing manufacturing costs under the conditions of large-scale production.

2. Improve production efficiency

The high-speed and high pixel imaging system of the multi-layer automatic cutting machine can achieve automatic positioning and cutting processing, enabling continuous production with low failure rate, short production preparation time, and high production efficiency.

3. Improve product yield

The multi-layer board automatic closing machine completes the operation with high precision according to the requirements of programming design, effectively avoiding the influence of subjective factors caused by human factors, ensuring consistent product quality after operation, and reducing the rate of product failure and loss.

4. Improve the recovery rate of copper scraps
The design of the copper edge material recycling system realizes the cutting and recycling of pure copper edge materials, realizing high value-added recycling of waste materials, turning waste into treasure, and reducing production costs for enterprises.

Equipment size	L9800W2000H2000mm	Standard 45 * 51 press machine
Equipment size	L7500W2000H2000mm	Standard 33*45 press machine
size	1350*1400mm	Standard 45 * 51 press machine
size	860*1350mm	Standard 33*45 press machine
size	min:350350 max:740630	Small board size after disassembly
category	Support 1 tile 2/3/4/5/6	Support cross shaped panel assembly
Plate thickness	0.3-3.5mm	0.15-4.0
copper thickness	1/3~4oz
productivity	sheet/20Sec (1 in 4)	Standard 45 * 51 press machine
Copper edge recovery rate	Leave a margin of less than 5mm	Calculated based on maximum flow rate
Cold plate method（Optional）	forced air cooling	Sun flip board
Receiving method	Horizontal material collection	Double material receiving machine

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content