Note: Other studio sizes, temperature ranges, rain tests, drip tests, waterproof tests, and other technical specifications can be customized according to the actual needs of users.

1.1 Dimensions inside the box

1500mm x 1500mm x 1600mm (depth x width x height) (customized according to customer requirements)

1.2. External dimensions

Approximately 2291mm x 4200mm x 3411mm (depth x width x height) (according to production drawings)

1.3 Power Supply

380V ± 10%, 50Hz ± 1 three-phase four wire+grounding wire, protective grounding resistance less than 4 Ω

1.4. Total power

25KW

1.6. Meet the test standards

GJB 150.8-1986 Waterproof Test

2. Main technical parameters

rain test

2.1.1 Temperature Range

（RT+10℃）～55℃

2.1.2 Rainfall intensity

10-20 cm/h (rainfall at the turntable, rainfall intensity adjustable)

2.1.3 Raindrop diameter:

0.5mm～4.5mm

2.1.4 Wind speed range:

5-18m/s (horizontal wind speed at the center of the turntable inlet)

2.1.5 Rain exposure time:

Free setting and automatic control within 0-999 minutes, with the ability to cycle periodically.

2.1.6 Heating range of test sample:

The water temperature of rainwater is+10 ℃ (* up to+55 ℃)

2.1.7 Rotating worktable:

Size: Φ 800mm, and the turntable speed can be adjusted,

Load bearing capacity: ≥ 65Kg;

2.1.8 Size restrictions on workpieces

The allowable maximum size of the test piece is: Φ 700mm × 700mm

Drip test

2.2.1 Temperature Range

RT+10℃ ～＋55℃

2.2.2. Drip tray area:

760 × 760mm, drip tray height adjustable.

2.2.3. Raindrop diameter:

0.5mm～4.5mm， The aperture spacing is 25.4mm.

2.2.4 Drip volume:

≥280±300L /m2·h。

2.2.5 Distance:

Drip distance ≥ 1 meter.

2.2.6、 供水：

The water pump provides continuous water supply, but it is controlled (automatic water addition).

2.2.7 Dripping time:

0～999min， Adjustable settings.

2.2.8 Size restrictions on workpieces

The allowable maximum size of the test piece is: Φ 700mm × 700mm

Waterproof test

2.3.1 Flushing pressure

≥276kPa.

2.3.2 Stainless steel nozzle:

Top mounted, square format, adjustable nozzle angle

2.3.3 Number of nozzles

At least one nozzle shall be installed 450mm to 500mm away from the surface of the test sample within the surface area receiving rainfall of 0.56 square meters.

2.3.4 Water supply method:

The water pump provides continuous water supply.

2.3.5 Test time:

0～999min， Adjustable settings.

2.3.6 Raindrop diameter:

2mm～4.5mm。

2.3.7 Size restrictions on workpieces

The allowable maximum size of the test piece is: Φ 700mm × 700mm