VIP member
MTN-2800D nitrogen blowing concentration device
MTN-2800D nitrogen blowing concentration device
Product details
Product Introduction:
Nitrogen blowing is used for sample preparation in liquid phase, gas phase, and mass spectrometry analysis. It adopts internationally recognized technology to concentrate the sample by blowing nitrogen into the surface of the heated sample. This method has the characteristics of time-saving, easy operation, and easy control, and can quickly obtain the expected results. This technology uses solid-phase extraction pretreatment technology instead of traditional liquid-phase extraction and chromatography techniques, enabling rapid separation and purification of samples. Replacing the commonly used rotary evaporator with nitrogen blowing for concentration greatly shortens the analysis time. The MTN-2800D nitrogen blowing device produced by our company uses aluminum heating blocks as the bathroom, which have good heat transfer performance, uniform heat transfer, and are conducive to rapid heating and temperature control. Blow nitrogen onto the surface of the sample to achieve anaerobic concentration of the liquid sample. Blow pipes are independent of each other and will not cause cross contamination.
Product features:
MTN-2800D has multiple thermal blocks to choose from.
2. The MTN-2800D is equipped with a specially designed water box to prevent accidental spillage of liquid during operation, in order to avoid damaging the internal circuit.
3. The ultra thick heating block of 70mmH makes the overall temperature of the heating block more uniform and accurate, and the temperature of the heating block will also be directly detected by the sensor.
The dual protection of automatic upper limit temperature protection and temperature deviation protection ensures safer use.
5. There are two methods: timed constant temperature or continuous constant temperature.
6. Four sets of digital displays display the set temperature, actual temperature, set timing, and incremental/decremental timing.
7. The internal structural design allows the instrument to operate at a relatively high constant temperature for a long time.
Specification parameters:
Product model: MTN-2800D-12/24/40
Temperature regulation range: room temperature+5 ℃~180 ℃
Temperature regulation accuracy: ± 0.1 ℃
Upper limit temperature protection: 185 ℃
Temperature deviation protection: set temperature+5 ℃
Timed time: 10 minutes to 99 hours and 59 minutes
Heating block holes: 6 holes/12 holes/20 holes
12 holes/24 holes/40 holes
Heating power: 350W
Heating block size (mm): 95Wx70Hx75L
150Wx70Hx95L
Power supply voltage: 220V/50Hz
External dimensions (excluding support rod height in mm): 240Wx130Hx215D
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-