VIP member
MSR35S
Advantages and features: The Taiwan PMI slide rail MSR35S belongs to the roller heavy load type, with a mounting hole spacing of 40 and a slider mount
Product details
Advantages and Characteristics:The Taiwan PMI slide rail MSR35S belongs to the roller heavy load type, with a mounting hole spacing of 40 and a slider mounting hole of 50 * 50. The Taiwan Intime linear guide rail has interchangeability, and the slider or guide rail or even the linear guide rail group can be replaced separately, allowing the machine to regain high-precision guidance.
| model | Dimensions (mm) | Slide size (mm) | |||||||||||||||||||||||
| height H |
width W |
length L |
W2 | H2 | B | C | S | L | L1 | T | N | G | K | E1 | G1 | Oil nozzle specifications | |||||||||
| MSR35S | 55 | 70 | 125.3 | 18 | 6.5 | 50 | 50 | M8 | 14 | 82.3 | 12 | 15 | 12 | 8 | 7 | M6 | G-M6 | ||||||||
| model | Slide size (mm) | Basic Load Rating | Allowable static moment | weight | ||||||||||
| width W1 |
height H1 |
pitch P |
E std. |
D×h×d | Dynamic load C kN |
Static load Co kN |
Mp kN-m |
My kN-m |
Mr kN-m |
slider kg |
guide rail kg/m |
|||
| single | double | single | double | |||||||||||
| MSR35S | 34 | 30.5 | 40 | 20 | 14×12×9 | 57.9 | 123.5 | 1.59 | 9.56 | 1.59 | 9.56 | 2.09 | 1.65 | 7 |
Friction of Yintai linear guide MSR35S is inevitable
In the vast majority of cases, fluid lubrication is limited to the boundary region, and direct friction generated by metal contact is unavoidable. In this friction, a large amount of energy is wasted through frictional losses.
In most cases, grease lubrication is sufficient, which makes it particularly easy to rotate Yintai linear guides in terms of lubrication system planning, utilization, and maintenance of machine toolsMSR35SThere is a slight or negative gap between the slider and the guide rail, which can greatly improve the overall rigidity and movement accuracy of the guide rail. The G slider and guide rail are precisely integrated into a whole, with high rigidity and four directional equal loads, which enables them to have a large load-bearing capacity. The E2 self-lubricating module product, innovatively designed by HIWIN, combines the concept of a detachable design, allowing the linear guide rail to extend its maintenance cycle. The E2 self-lubricating module has the characteristics of cost saving, cleanliness and environmental protection. It is easy to install, disassemble and maintain, and the transparent oil tank can be used to check the oil level at any time, and corresponding lubricating oil can be selected. Can be utilized in extraordinary situations such as dust, harsh weather conditions, and water usage.
The self-lubricating module not only increases the convenience of user maintenance, but its modular plan also allows customers to directly purchase E2 self-lubricating module kits and install them on the slider to achieve the function of lubricating parts. The high efficiency of the machine plan is achieved by the elastic deformation of the steel balls in the rotating linear guide rail, which can receive deviations in the placement surface and reduce the flatness requirements of the guide rail placement surface, thereby lowering the cost of mechanical processing. Yintai linear guide railMSR35SIt has the characteristic of receiving after averaging the straightening deviations such as perpendicularity, flatness, and intersection that occur during the processing and assembly of the bottom of the guide rail. Therefore, linear guide rails are adoptedMSR35SIt can greatly improve the effectiveness of machine planning.
The friction loss of the rolling surface is also correspondingly reduced, which can keep the linear rolling guide system in a high-precision state for a long time.
The Taiwan PMI slide rail MSR35S belongs to the roller heavy load type, with a mounting hole spacing of 40 and a slider mounting hole of 50 * 50. The Taiwan Intime linear guide rail has interchangeability, and the slider or guide rail or even the linear guide rail group can be replaced separately, allowing the machine to regain high-precision guidance.
The Taiwan PMI slide rail MSR35S belongs to the roller heavy load type, with a mounting hole spacing of 40 and a slider mounting hole of 50 * 50. The Taiwan Intime linear guide rail has interchangeability, and the slider or guide rail or even the linear guide rail group can be replaced separately, allowing the machine to regain high-precision guidance.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-