VIP member
MPM388 Pressure Sensor | MPM388 Pressure Resistance Sensor | MPM388
The MPM388 piezoresistive pressure sensor is composed of silicon piezoresistive sensitive elements packaged in different pressure interfaces. The meas
Product details
The MPM388 piezoresistive pressure sensor is composed of silicon piezoresistive sensitive elements packaged in different pressure interfaces. The measured pressure is applied to the silicon sensitive element through the pressure interface, achieving linear conversion between the applied pressure and the output voltage signal. The thick film resistor network adjusted by laser compensates for the zero point and temperature performance of the sensor, and is suitable for pressure calibration instruments, automotive electronics, aerospace, air pressure control, industrial measurement and control, etc. The pressure interface of this type of sensor, which complies with the HB4-3 standard, has been widely used in the aviation industry.
Laser resistance compensation zero point and temperature performance;
Suitable for non-conductive and non corrosive liquids or gases;
Multiple structures to choose from;
• Compact size, easy to install;
• Gauge pressure, absolute pressure, and sealed gauge pressure;
• Constant current source power supply.
@1.5mADC，25℃ range 0～20kPa…7MPa power supply 1.5mADC overvoltage 1.5 times full range pressure Zero point output ≤±2mVDC Full range output ≥50 mVDC nonlinear ± 0.25% FS (typical value) ± 0.50% FS (maximum value) repetitiveness ± 0.05% FS (typical value) ± 0.10% FS (maximum value) hysteresis ± 0.05% FS (typical value) ± 0.10% FS (maximum value) Zero temperature error ± 1.0% FS (typical value) ± 2.0% FS (maximum value) Full range temperature error ± 1.0% FS (typical value) ± 2.0% FS (maximum value) compensation temperature 0℃～50℃ Operating Temperature -40℃～120℃ long-term stability ± 0.2% FS/year (typical value) ± 0.3% FS/year (maximum value)
Select code I Select code II Select code III Wire color connect pin Wire color connect pin connect black Positive input (+IN) 1 black Positive input (+IN) 4 Positive output (+OUT) red Positive output (+OUT) 2 red Positive output (+OUT) 5 Positive input (+IN) blue Negative output (- OUT) 3 blue Negative output (- OUT) 6 Negative input (- IN) white Negative input (- IN) 4 White (yellow) Negative input (- IN) 10 Negative output (- OUT) yellow Negative input (- IN)
Selection Tips
1. The part of the cable exceeding 1.5m shall be charged according to its length.
2. Special requirements, please discuss with our company and indicate them in the order.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-