VIP member
MD, MF, MP series 1000W power module
MD, MF, MP series modular power supply product introduction MD series modular power supply is a compact, high power density, low-cost industrial grade
Product details
MDTheMFTheMPSeries module power supplyProduct Introduction
The MD series modular power supply is a compact, high power density, and low-cost industrial grade power module;
The MF series modular power supply adds input PFC function, output voltage analog regulation function, output current analog regulation function, analog switch function and other functions on the basis of the MD series module, providing customers with better product performance.
The MP series modular power supply has both input PFC function and communication function, and the communication interface defaults to RS485.
Customers can easily use the upper computer to set parameters such as output voltage, current, power on/off, overvoltage and overcurrent protection points of the power supply. At the same time, the output voltage value, current value, working status, and set parameters of the power supply can be collected in real time. The MP series module defaults to remembering the last set parameters after power failure.
The MD, MF, and MP series power modules have the following characteristics:
The input stage design includes differential mode and common mode filtering circuits, slow start circuits, and undervoltage detection circuits;
★ Small size and high power density;
The product can operate reliably and stably within the temperature range of -40 ℃ to+55 ℃;
★ It has two working modes: constant voltage and constant current;
★ Wide range of product voltage regulation;
★ Wide range of product current regulation;
★ Equipped with a temperature controlled fan;
★ The protection function is complete, with over temperature protection, over-current protection, over-voltage protection and other protection functions.
MDSeries Structure Size A
MFTheMPseries“600WModule size-B”
|
model |
1000-24 |
one thousand |
-36 |
one thousand |
-48 |
|
|
one thousand -60 |
one thousand |
-360 |
DC output |
feature |
Voltage adjustment range |
2.0-32V |
|
2.0-40V |
2.0~56V |
2.0~68V |
2.0~360V |
Range of current regulation |
0~41A |
|
|
0~27A |
0~20A |
0~16A |
0~2.7A |
Factory voltage |
24±0.2V |
|
|
36±0.2V |
48±0.2V |
60±0.2V |
360±0.2V |
power |
1.0kW |
|
|
1.0kW |
1.0kW |
1.0kW |
1.0kW |
efficiency |
92% |
|
|
92% |
93% |
93% |
94% |
Voltage regulation rate |
0.5% |
|
|
0.5% |
0.5% |
0.5% |
0.5% |
Load adjustment rate |
0.5% |
|
|
0.1%0.1% |
0.1% |
0.1% |
Ripple and Noise |
maximum |
80mV |
|
|
80mV |
80mV |
80mV300mVInput characteristicsinput voltageAC220V±20%The |
||||
|
50±5 Hz |
（AC115V±20%The input needs to be customized.input currentnot greater than |
|||||
|
6A |
The surge current is not greater than10A. |
|||||
|
safetyleakage current3mA(240VAC) |
||||||
|
.The insulation resistance shall not be less than200MΩ(500VDC).Voltage resistance: Input to output1.5kV; Input on the chassis |
||||||
|
1.5kV |
Output to the casing |
0.5kV |
||||
|
. |
otherprotectOver temperature protection (cut-off); Overcurrent protection (constant current); Overvoltage protection (cut-off)environmentOperating Temperature -40℃~+55℃（10%~95%RH）；Storage temperature: |
|||||
|
-40℃~+60℃ |
（10%~95%RH）.Size and weightMDSeries: Weight ≤*1.5kg*; Structural dimensions226*108*41(Long)wideHigh,mm）Refer to “600WModule size-A”；MFSeries: Weight ≤*1.8kg*; Structural dimensions226*108*41(Long)wideHigh,mm）Refer to “600WModule size-B”；MPSeries: Weight ≤*1.8kg*; Structural dimensions226*108*41(Long)wideHigh,mm）Refer to |
|||||
|
“600W |
Module size |
|||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-