Wireless fire smoke detectorF-SDM110 is a LoRa supported deviceSmoke alarmThe product adds wireless transmission and networking functions to the independent smoke detector, achievingWireless fire smoke detectorCentralized monitoring and management. shouldWireless fire smoke detectorCan be applied in security or fire protection systems.

Wireless fire smoke detectorIt is a household product specifically developed for the Chinese domestic marketSmoke alarmIt can also be applied to security or fire protection systems and belongs to wireless devices that can work independentlyFire smoke detector and alarmWhen the smoke concentration on site reaches the alarm threshold or the test switch is pressed and held, the LED of the alarm will change from flashing once for a long time toRapid flashing, accompanied by an audible alarm signal. When the smoke concentration falls below the alarm threshold or the test switch is released, wirelessFire smoke detector and alarmIt will return to normal state (without locking the alarm state, the LED will flash for a long time, and the sound will disappear).

Alarm testing

Wireless fire smoke detectorThere is a test button above, pressing it for more than 3 seconds will trigger an audible and visual alarm. At this point, the device will also report an alarm to the server.
Anti pry alarm
shouldWireless fire smoke detectorIf it is not installed properly or if it is pried, an alarm will be triggered immediately. The platform will immediately be aware of the device being pried.
Offline alarm
shouldWireless fire smoke detectorEvery 8 hours, data will be regularly reported to the platform. If the device does not report data for one consecutive day, an offline alarm will be triggered.
Smoke monitoring alarm
shouldWireless fire smoke detectorWhen monitoring smoke, immediately trigger alarm data to the platform.
Sleep and wake-up
shouldLoRaWireless fire smoke detectorThe power on state is in the wake-up state, and after 5 seconds, it enters the scheduled sleep mode, which lasts for 1 hour. After waking up, it sends a heartbeat packet and continues to sleep.
Fire alarm function
shouldLoRaWireless fire smoke detectorWhen a fire alarm is triggered and the fire alarm trigger port is at high level, the device wakes up and reports the fire alarm information to the gateway.
tamper device
shouldWireless fire smoke detectorAnti disassembly switch status changesWhen,Start detection in two seconds. If the switch status changes, immediately send an alarm to the gateway. Otherwise, it will be considered as a false press.
Heartbeat packet reporting
shouldLoRaWireless fire smoke detector 8Wake up once every hour, collect the current device voltage, and report the heartbeat packet.