Working mode of microinjection pump

Infusion, extraction, extraction before infusion, infusion before extraction, continuous

Control method

2Channel independent control, separate calibration; Can run independently or work together

flow range

0.764nl-197.669ml/min

Number of syringes that can be installed

2

Applicable syringe specifications

5uL-200mL

maximum stroke

140mm

Travel resolution

0.156μm

Linear velocity range

7. 94 um/min to 79.4 mm/min (flow rate=linear velocity x cross-sectional area of injector)

Linear velocity adjustment resolution

5μm/min

Travel control accuracy

error≤± 0.5% (when the stroke is ≥ 30% of the maximum stroke)

Rated linear thrust

≥600N

Syringe selection

Built in main manufacturers and models of syringes for selection

Syringe customization

Can be directly injected into the syringe through

Flow correction

Obtain more accurate liquid volume through calibration program

Run parameter settings

Distribution volume, injection time, etc

Display parameter selection

Liquid volume, flow rate or linear velocity

Power off memory

After powering on again, you can choose whether to continue working according to the state before power failure

Status signal output

2-channel OC gate signal output, used to indicate start/stop and direction status

Control signal input

2-channel start stop control input, 1-channel falling edge trigger signal controls start stop; 1-channel TTL level signal controls start stop

communication interface

RS485

Overall dimensions

280×210×140(mm)

weight

7.5kg

Use power supply

AC 90V-260V/50W

Relative humidity of working environment

＜80%

Working environment temperature

0℃-40℃