product overview Product overview

The LPS-N8 series electronic pressure switch is a new generation of intelligent products that can collect pressure values of on-site pipelines and pressure vessels, display them locally, output switch actions, and transmit signals remotely, making it easy for subsequent control and collection. The local switch control output is a dry contact SPDT or PNP/NPN switch signal, and the analog output supports 4-20mA current signal. Compared with mechanical pressure switches, it is very convenient to adjust the set value. At the same time, it can set multiple modes of single point alarm, alarm within the upper and lower limit range, and alarm outside the upper and lower limit range. Widely used in various industries such as petroleum, chemical, metallurgical, hydraulic, lubrication, pharmaceutical, etc. that require pressure control.

performance index TECHNICAL PARAMETERS

Power supply: 18~32VDC, typical value: 24VDC
Measurement media: oil, water, gas, and other media compatible with stainless steel;
Measurement range: Negative pressure type: -0.1~0Mpa; Micro pressure type: 0-2KPa; Positive pressure type: 0-60Mpa; (Higher requirements can be customized)
Measurement accuracy: 0.25% FS; (higher accuracy can be customized)
Overload capacity: 2 times full load pressure:
Analog output: 4-20mA, 0-10V;
Switch output: 2-channel PNP/NPN switch;
Contact capacity: 250VAC, 3A/24VDC 1A;
Load capacity: current type ≤ 500 Ω, voltage type ≥ 250K Ω;
Threaded interface: M20 * 1.5 (customizable on site);
Electrical interface: M20 * 1.5 standard outlet hole, including locking wire busbar;
Temperature drift coefficient: Within the specified working temperature, for every 10 ℃ change in ambient temperature, the output change is ≤ ± 0.05% of the range, and the annual drift is ＜ ± 0.3%
Long term stability: ± 0.1% FS/year;
Shell material: die cast aluminum, epoxy resin coating, with sealing gasket
Shell protection: IP65
Explosion proof rating: Exd IIC T6Gb;
Working temperature: -20~85 ℃
Storage temperature: -40~100 ℃
Relative humidity: 0-95% RH

External dimensions APPEARANCE OF SIZE

The materials are being prepared ..

INSTALLATION REQUIREMENTS INSTALLATION

The materials are being prepared ..