Product Introduction

The LNQ-1 compressor condenser can quickly transfer the heat in the pipes to the air near the pipes. The German Biele compressor condenser is selected, which has the characteristics of corrosion resistance, high temperature resistance, high pressure resistance, and durability. Equipped with a constant adjustment system, it achieves automatic constant temperature regulation, allowing the measured gas to maintain a constant dew point even in harsh environments.

Product advantages

Adopting fluorine free and environmentally friendly refrigerants, with high power, reliable operation, stable performance, small size, light weight, and fast cooling speed;
A special heat exchange bucket utilizes the physical characteristics of fast and even heat dissipation through condensation to achieve constant temperature in the heat exchanger, with fast and uniform cooling speed;

Equipped with a high temperature automatic alarm system, when the refrigeration temperature exceeds the set temperature, an alarm signal will be transmitted.

Product parameters

Working environment humidity: 3 ℃~50 ℃
Inlet sample humidity: 180 ℃
Dew point of inlet sample gas: 80 ℃ (working environment humidity 25 ℃)
Dew point of export sample gas: 4 ℃ (working environment humidity 25 ℃)
Refrigeration control temperature: factory set to 3.0C
Temperature controller fluctuation: 3.0 ℃± 0.5 ℃ (working environment humidity 25C)
Refrigeration method: Fluorine free compressor
Condenser tube: A+B glass heat exchange tube, size diameter * height: 40mm * 150mm (effective size)
Input sample gas pressure range: 3 Bar
Allowable airflow pressure range: 3 mBar (flow rate 2NL/min)
Sample gas processing capacity: 4 NL/min
Fault alarm: low temperature alarm, deviation alarm, and power outage alarm, alarm status is dry node output, node capacity: 250Vac/1A
Voltage withstand test indicators: AC1500V
Leakage current: 3.5mA
Sample gas input interface: OD6mm card sleeve
Coolant output interface: OD6mm card sleeve
Cooling working time: 30 minutes
Installation method: Wall mounted backboard installation
Power supply: 220VAC/50Hz
Power supply: 400W
Cabinet size (W * H * D): 310 * 280 * 290mm
Equipment weight: 16.88kg
4-20 mA signal output: optional

case

Monitoring and process control of exhaust emissions from coal-fired power plants, waste to energy plants, cement plants, glass plants, lime plants, ceramic plants, sintering plants, coke ovens, desulfurization processes, denitrification processes, etc