Characteristics:

This series of hydraulic presses is a "C" type single arm body structure consisting of a machine direction, master cylinder, motor, etc. CO2 welding of all steel plates on the fuselage. The hydraulic system is arranged inside the machine body and centrally controlled by buttons, which can achieve adjustment, manual, and semi-automatic operation modes, making it easy to operate. The work pressure stroke can be adjusted within the specified range. Can expand the working range, utilize the three sided space, extend the hydraulic cylinder stroke (optional), with a maximum extension of 246mm-800mm, preset working pressure, hydraulic system heat dissipation device, electronic digital tonnage display (optional).

Function:

This machine has a wide range of versatility. This series of hydraulic presses is suitable for processes such as stretching, punching, bending, flanging, correction, pressing, cold and hot extrusion of metal materials; Compression molding of powder products, plastic products, and insulation materials. It can also be applied to the calibration of shaft parts, profiles, and the press fit of shaft sleeve parts.

Electrical control system:
The power supply of this machine adopts a three-phase four wire system, with a voltage of 380V, 50HZ, a control circuit of AC 220V, and indicator lights
The circuit is 24V, and the control voltage of the solenoid valve is AC 220V.
1. This machine is equipped with a dedicated electrical box, installed on the workshop floor, and the distance from the main engine room can be determined according to the requirements of the customer.
2. Set up a button box that can complete the functions of "dual hand suppression" and "emergency stop".
3. The main electrical control components are all from well-known domestic brands. Special requirements or designated brands can be customized.

Single arm hydraulic press parameters:

Contact phone number: