Input channel:

1 (can be connected to 1 transmitter)

Input resistance:

250Ω

Wiring resistance:

(Wiring between transmitter and distributor) 18V (1) - Minimum operating voltage of transmitter (2) 0.02A

(1) 18V is the minimum supply voltage, which is the difference between 24V and the internal voltage drop of the transmitter (6V).

(2) The minimum operating voltage of the diffusion silicon transmitter is 12VDC

Output:

Two isolated outputs

The first route:

1-5V DC or 4-20mA DC (optional for users, 4-20mA DC at factory)

The second route:

Serial communication output, communication protocol: RS-232, RS-485

Load resistance:

Less than 250 Ω (when outputting 1-5V DC)

Allowable load resistance:

0-600 Ω (at 4-20mA DC output)

Accuracy:

±0.2％FS

Distribution voltage of transmitter:

24-28VDC (with power switch) with short circuit protection circuit (short circuit time within 5 minutes)

Response time: mV Input: approximately 500ms (time constant) V, mA Input: approximately 100ms (time constant)

Common mode rejection ratio:

At 50Hz, greater than 120dB

Isolation:

Input, output 1, output 2, and power supply are isolated from each other

Power supply:

AC or DC power supply AC: 220V ± 15%, 50/60Hz DC: 24V ± 10%

Power consumption:

4.4VA at 220V AC; 100mA at 24V DC

The impact of power supply changes:

When using AC power, ± 0.1% FS/10V; ± 0.1% FS/max when using DC power supply

Ambient temperature

0～55℃

Relative humidity:

5-99% RH (non condensing)

Insulation resistance:

100M Ω/500V DC between each terminal and the power terminal

Insulation strength:

Between power terminal and ground terminal: 1500VAC, 1 minute. Between input/output terminal and power terminal: 500VDC, 1 minute

Structure:

Miniature plug-in structure, color beige N4.0

Weight:

Main body: about 100g; socket: about 50g

Maintenance:

The main body can be replaced while the wiring is installed

Attachment:

Partition (used for DIN rail installation... 1 piece)

Signage:

1 set