VIP member
Intelligent digital inspection instrument
The intelligent digital inspection instrument adopts a dedicated integrated instrument chip, and the measurement input and transmission output adopt d
Product details
Intelligent digital inspection instrumentThe meter adopts a dedicated integrated instrument chip, and the measurement input and transmission output use digital calibration and self calibration technology, ensuring accurate and stable measurement, eliminating measurement errors caused by temperature drift and time drift. This series of instruments adopts surface mount technology and is designed with multiple protection and isolation measures. It has passed EMC electromagnetic compatibility testing and has strong anti-interference ability, high reliability, and high cost-effectiveness.
Intelligent digital inspection instrumentThe meter has programmable functions for multiple types of inputs, and can be matched with different input signals (thermocouple/thermistor/linear voltage/linear current/linear resistance/frequency, etc.). At the same time, the display range, alarm control, etc. can be set by the user on site, and can be used in conjunction with various sensors and transmitters to achieve measurement, display, adjustment, alarm control, data acquisition, and recording of physical quantities such as temperature, pressure, liquid level, capacity, and force. Its application range is very wide.
Intelligent digital display instrumentThe measurement value (PV) and channel value (CH) are displayed using dual row four position LEDs, and alarm display of each channel measurement value is performed using dual color light-emitting tubes. It also has zero and full correction, cold end compensation, digital filtering, communication interface, multiple alarm methods, and can be equipped with relay alarm output, transmission output, or standard communication interface (RS485 or RS232C) output.
Intelligent digital inspection instrumentThe meter has programmable functions for multiple types of inputs, and can be matched with different input signals (thermocouple/thermistor/linear voltage/linear current/linear resistance/frequency, etc.). At the same time, the display range, alarm control, etc. can be set by the user on site, and can be used in conjunction with various sensors and transmitters to achieve measurement, display, adjustment, alarm control, data acquisition, and recording of physical quantities such as temperature, pressure, liquid level, capacity, and force. Its application range is very wide.
Intelligent digital display instrumentThe measurement value (PV) and channel value (CH) are displayed using dual row four position LEDs, and alarm display of each channel measurement value is performed using dual color light-emitting tubes. It also has zero and full correction, cold end compensation, digital filtering, communication interface, multiple alarm methods, and can be equipped with relay alarm output, transmission output, or standard communication interface (RS485 or RS232C) output.
1. Specialized integrated instrument chips have more reliable anti-interference and stability.
2. Universal signal input, can be matched with commonly used thermal signals through menu settings.
3. The display range, transmission output range, alarm value, and alarm mode can be modified online through the menu.
4. The anti-interference mode combining software and hardware effectively suppresses on-site interference signals.
5. Digital calibration technology, without adjustable components such as potentiometers.
6. Automatic compensation for thermocouple cold junction temperature and thermal resistance lead resistance.
7. The measurement range and upper and lower limit alarm values for each channel can be set separately.
8. It has the functions of rapid inspection and fixed-point monitoring, and the inspection time can be set.
9. Through electromagnetic compatibility (EMC) testing from input, output, and power terminals.
2. Universal signal input, can be matched with commonly used thermal signals through menu settings.
3. The display range, transmission output range, alarm value, and alarm mode can be modified online through the menu.
4. The anti-interference mode combining software and hardware effectively suppresses on-site interference signals.
5. Digital calibration technology, without adjustable components such as potentiometers.
6. Automatic compensation for thermocouple cold junction temperature and thermal resistance lead resistance.
7. The measurement range and upper and lower limit alarm values for each channel can be set separately.
8. It has the functions of rapid inspection and fixed-point monitoring, and the inspection time can be set.
9. Through electromagnetic compatibility (EMC) testing from input, output, and power terminals.
1. Display mode: Double row four digit LED displays the measured value (PV) and channel number (CH).
2. Display range: -1999 to 9999.
3. Measurement accuracy: ± 0.2% FS ± 1 word or 0.5% FS ± 1 word; ± 0.1% FS ± 1 word (requires special customization).
4. Display range and resolution: Each channel can be set with display range and decimal places as needed;
5. Input signal: Thermocouples: K, E, S, B, J, T, R, N, Wre5-Wre26, Wre3-Wre25; Automatic compensation range for cold end temperature: 0-50 ℃;
Thermal resistance: Pt100, Cu100, Cu50, G, BA2, BA1; Lead resistance compensation range ≤ 15 Ω;
DC voltage: 0-20mV, 0-75mV, 0-20mV, 0-5V, 1-5V linear or square root; 0-10V (to be specified when ordering);
DC current: 0-10mA, 4-20mA linear or square root;
Each channel can be set arbitrarily (through a combination of software settings and hardware jumpers);
6. Analog input impedance: current signal Ri=100 Ω; voltage signal Ri=500K Ω.
7. Inspection method: a. Manual inspection: You can manually check the measurement values of each channel by pressing the ∧ and ∨ keys; Return to automatic inspection mode after 2 minutes of no button operation.
b. Automatic inspection: The instrument displays the measurement values of each channel in a cyclic manner according to the set display interval, with a set interval of 0.5-50 seconds and a default of 1 second. Press the>key to switch between the above two inspection methods.
8. Analog transmission output: a. Transmission type: 0-10mA, 0-20mA, 4-20mA, 0-5V, 1-5V, 0-10V optional;
b. Output method: The average, maximum, or minimum values of the measured values from each channel can be selected for transmission and output; Can specify any one of the 16 channels for transmission output; The transmission range of all output modes must be the same;
9. Alarm relay contact capacity: AC220V 3A or 24V 5A (resistive load).
10. Alarm method: a. Each channel sets a unified alarm value and shares relay output;
b. Set alarm values for each channel and share relay outputs;
c. Each channel is equipped with alarm values and independent relay outputs (this method requires separate alarm control boxes);
d. Each channel has independent dual color indicator lights that sound an alarm; Red light indicates upper limit alarm, green light indicates lower limit alarm;
11. Alarm accuracy: ± 1 word.
12. Protection method: Input circuit disconnection, input signal over/under range alarm.
13. Setting method: Panel touch button numerical setting, set value permanently saved after power-off.
14. Communication method: RS232 or RS485 optional, using standard Modbus RTU protocol, with strong universality and high reliability. Please refer to "Inspection Instrument Communication" for details.
15. Usage environment: Environmental temperature: -10~55 ℃; Environmental humidity: 10-90% RH.
16. Voltage resistance: Input/output/power/communication ≥ 1000V.AC/1 minute.
17. Insulation impedance: Input/output/power/communication ≥ 100M Ω.
18. Power supply: AC 85-265V, frequency: 50Hz/60Hz;
DC: DC 16-32V.
19. Power consumption:<5W.
2. Display range: -1999 to 9999.
3. Measurement accuracy: ± 0.2% FS ± 1 word or 0.5% FS ± 1 word; ± 0.1% FS ± 1 word (requires special customization).
4. Display range and resolution: Each channel can be set with display range and decimal places as needed;
5. Input signal: Thermocouples: K, E, S, B, J, T, R, N, Wre5-Wre26, Wre3-Wre25; Automatic compensation range for cold end temperature: 0-50 ℃;
Thermal resistance: Pt100, Cu100, Cu50, G, BA2, BA1; Lead resistance compensation range ≤ 15 Ω;
DC voltage: 0-20mV, 0-75mV, 0-20mV, 0-5V, 1-5V linear or square root; 0-10V (to be specified when ordering);
DC current: 0-10mA, 4-20mA linear or square root;
Each channel can be set arbitrarily (through a combination of software settings and hardware jumpers);
6. Analog input impedance: current signal Ri=100 Ω; voltage signal Ri=500K Ω.
7. Inspection method: a. Manual inspection: You can manually check the measurement values of each channel by pressing the ∧ and ∨ keys; Return to automatic inspection mode after 2 minutes of no button operation.
b. Automatic inspection: The instrument displays the measurement values of each channel in a cyclic manner according to the set display interval, with a set interval of 0.5-50 seconds and a default of 1 second. Press the>key to switch between the above two inspection methods.
8. Analog transmission output: a. Transmission type: 0-10mA, 0-20mA, 4-20mA, 0-5V, 1-5V, 0-10V optional;
b. Output method: The average, maximum, or minimum values of the measured values from each channel can be selected for transmission and output; Can specify any one of the 16 channels for transmission output; The transmission range of all output modes must be the same;
9. Alarm relay contact capacity: AC220V 3A or 24V 5A (resistive load).
10. Alarm method: a. Each channel sets a unified alarm value and shares relay output;
b. Set alarm values for each channel and share relay outputs;
c. Each channel is equipped with alarm values and independent relay outputs (this method requires separate alarm control boxes);
d. Each channel has independent dual color indicator lights that sound an alarm; Red light indicates upper limit alarm, green light indicates lower limit alarm;
11. Alarm accuracy: ± 1 word.
12. Protection method: Input circuit disconnection, input signal over/under range alarm.
13. Setting method: Panel touch button numerical setting, set value permanently saved after power-off.
14. Communication method: RS232 or RS485 optional, using standard Modbus RTU protocol, with strong universality and high reliability. Please refer to "Inspection Instrument Communication" for details.
15. Usage environment: Environmental temperature: -10~55 ℃; Environmental humidity: 10-90% RH.
16. Voltage resistance: Input/output/power/communication ≥ 1000V.AC/1 minute.
17. Insulation impedance: Input/output/power/communication ≥ 100M Ω.
18. Power supply: AC 85-265V, frequency: 50Hz/60Hz;
DC: DC 16-32V.
19. Power consumption:<5W.
Online inquiry