FX-EX57
1 characteristic
1)4K HDMI IPFiber optic extender
2)USB 2.0 IPEXTENDER
3)Support single Ethernet cableCat5e/6Long distance network cabletransmission120mSupport fiber optic cable transmission60Km(single mode)
4)support4k@60Hz (YUV 4:2:0)Video input,support4k@30HzVideo output
5)compatibleHDCP2.2/HDCP1.4
6)Support bidirectional infrared direct access(38KHz-56KHz),supportRS232Network, buttons/infrared control
7)Support infrared remote control/Key control groupID,LEDdisplay groupID
8)Support Dolby,DTS-HDmain audio
9)Input audio:SPDIF5.1Mixed channel with left and right stereo sound
10)Output audio:SPDIF5.1Separate the left and right stereo mixing channels
11)Supports unicast, multicast, and video wall display systems(8x16),Output video;10G IGMPEthernet switches support multi-level cascading
12)support3D
13)support5V-18V
14)Power:TX:3W RX:3W
15)Size(LxWxH):TX:170x109x26mm;RX:170x109x26mm
16)Net weight:TX:472.8g; RX:472.3g
2 specifications
Technical Parameter |
|
agreement |
TCP, UDP, RTSP, RTP, DHCP, IGMP, multicast, IPV4 |
Support video formats |
4K@30HZ , 1080P/1080i/720P/576P/576i/480P/480i |
Supports audio formats |
stereo 192Kbps |
HDCP |
HDCP 2.2compatible |
IRfrequency |
38 -56 KHZ |
RS232Baud rate |
default115200bps,share8Optional species |
IPset up&groupIDset up |
|
defaultIP |
Automatic allocation |
groupID |
Group 00 ~ group 99 |
switch/Router requirements |
supportIGMP,supportDHCP |
Transmitter connector |
|
input |
1xHDMImicro, 1xUSB Btype, 1xAnalog audio cable,1xSPDIFAUDIO IN |
output |
1x RJ45output, 1xOptical fiber output |
RS232 |
Phoenix RS232port |
IRinfra-red |
1x IR TXport(Supports 38K-56KHz);
1x IR RXPort(Supports 38KHz) |
Receiver connector |
|
input |
1xRJ45input, 1xOPTICAL INPUT |
output |
1x HDMImicro, 2x USB Atype,1xSPDIFAudio output,1xAnalog audio output |
RS232 |
Phoenix RS232port |
IRinfrared |
1x IR TXport(Supports 38K-56KHz);
1x IR RXPort(Supports 38KHz) |
Environmental and electrical requirements |
|
operation temperature |
-5 to +35 ℃ (+23 to +95℉) |
Working humidity |
5 to 90%RH (non-condensing) |
power supply |
DC 5V |
power |
3 w |
physical property |
|
Dimensional dimension |
TX: 170x109x26mm ; RX: 170x109x26mm |
Net weight |
TX: 472.8g; RX:472.3g |
pour1 If there are any changes to the specifications,No further notice will be given. The quality and size are similar.
EX57 Connection andoperate
1)Check if the power supply is not connected to the socket
2)Set up group shooting end/Signal expansion and display at the receiving end.
3)Connect the sensor to the video source andHDMIcable,Connect to the monitor or display with the receiving endHDMICable.
4)From launchendarrivePCconnectUSBcable,connectUSBAdditional equipment,in compliance withUSBmouse, USBKeyboard andUSBUSB flash drive receiver.
5)launchendAnd receivingendConnect to Ethernet switch and network cable.
6)launchendPower on,receiveendAnd all connected devices.
7)electric supplycombineActivate all connected devices.
8)Extend the cable to connect the infrared transmitter and receiver of the wired remote control receiver.
application
Many to many