1、 MCG-100W Induction Wood Moisture Meter - Function Diagram of Wood Moisture Tester
　　
2、 MCG-100W Induction Wood Moisture Meter - Operation Method of Wood Moisture Tester
1. Press the ON button to turn on the power. The display screen will flash steadily and then show within the range of 00.0 ± 0.3 (with the tree species selected in any gear). After pressing the ON button, the power will automatically cut off for about 60 seconds, allowing the battery to have a longer usage time for self-protection.
Tip: After pressing the ON button several times, the display screen of the wood moisture tester still shows blurry or no numbers, indicating that the 9V battery has been depleted. Please replace the battery.
2. When turned on, if the LCD screen does not display within the range of 00.0 ± 0.3, please adjust and correct the zero position. Clockwise is a positive value, counterclockwise is a negative value.
3. Due to the electromagnetic wave penetration depth of the MCG-100W induction type wood moisture tester being 30mm, when the thickness of the measured wood is less than 30mm, the wooden board should be suspended for measurement or stacked for measurement, and the stacked thickness should not be less than 30mm.
4. When adjusting the tree species selection switch, if the correction knob on the left side of the instrument cannot make the display zero, you can carefully adjust the adjustment knob in the hole on the right side of the instrument in a straight line, clockwise is a positive value, counterclockwise is a negative value.
3、 MCG-100W Induction Wood Moisture Meter - Measurement of Wood Moisture Tester
The MCG-100W wood moisture tester utilizes Harris large-scale integrated circuit technology to ensure high sensitivity and accuracy in measuring wood moisture. Even slight changes in moisture content can be reflected by the instrument. Therefore, it is a highly accurate moisture meter for wood (wood fiber).
When using, please place the bottom of the instrument flat on the wood being tested. The surface of the wood should be smooth, otherwise measurement errors may occur.
If the moisture content of the tested wood is uneven, multiple points can be measured and the average value can be calculated to obtain the average moisture content.
Friendly reminder:
1. The instrument should measure in the direction of the wood fibers.
2. The surface of the wood should be flat.
3. The sensor of this wood moisture tester is located in the box at the bottom of the instrument (concealed type), with dimensions of 45mm in length and 44mm in width. Therefore, the surface of the tested wood should be larger than the surface of the sensor.
4. There should be no other objects around the tested wood, wood powder, or shavings, such as iron or magnetic sensors. Otherwise, the measurement results will be inaccurate.
When measuring wood powder and shavings, generally choose level 1.
5. The penetration depth of the electromagnetic wave of this instrument is 30mm. Therefore, when the thickness of the detected wood or wood powder is less than 30mm, it should be measured in suspension or stacked to at least 30mm. Otherwise, the electromagnetic wave scanning the moisture on the ground will affect the measurement results.
4、 MCG-100W Induction Wood Moisture Meter Technical Parameters of Wood Moisture Tester
1. Measurement range: 0-50%
2. Resolution: 0.1%
3. Display: 3 1/2 LCD LCD display
4. Electromagnetic wave scanning depth: 30mm
5. Tree species level: 6 levels
6. Power supply: One 9V (6F22) battery
7. Working environment: -5 ℃~50 ℃, relative humidity<80%
8. Accuracy: ± 0.5%
9. Size and weight: 125mm × 65mm × 31.5mm, 150g
5、 MCG-100W Induction Wood Moisture Meter - Warranty Statement for Wood Moisture Tester
1. This product comes with a one-year warranty from the date of purchase.
2. Damage caused by human error or unauthorized disassembly by the user will not be covered by warranty.