This door lock system has powerful functions and is flexible and convenient to use. It can achieve the opening mode of one card door and one card multiple door. The door lock can be set to a normally open state, and all the opening cards can be deleted and configured by the user themselves, minimizing security vulnerabilities. This system uses non-contact induction cards or EM series ID cards, which are a popular type of induction card. This door lock is suitable for modern offices, office buildings, high-end residential apartments, villas, etc.

There are three types of keys for non-contact induction card (ID) office and home door lock systems:

⑴ Master Control Key (Management Card)

Function: Open the door, equip the door card, and delete valid door cards.

⑵ Door opening card

Function: Open the door.

Mechanical key

Function: Emergency door opening, equipped with a master control key (management card).

Set up the main control card (management card)

2.1 Setting Status

Open the door with a mechanical key and keep it in the unlocking state (the unlocking state refers to the inclined tongue and large tongue of the lock cylinder being retracted into the lock body). The buzzer beeps once and the blue light lights up, then it enters the setting state. If you want to exit the setting state, release the mechanical key and turn off the blue light.

2. Set the main control key (management card)

After entering the setting mode, select any induction card that is close to the sensing area of the door lock. The buzzer beeps once and the blue light lights up, indicating successful setting. This induction card is the main control key (management card). To delete the main control key, use another card to be replaced and overwrite it in the same way.

3 sets of door cards

3.1 Enter key pairing mode

When approaching the sensing area of the door lock with the main control key (management card), the blue light flashes. After leaning against the main control key again and making a beep, the indicator light alternately flashes red and blue, indicating that the key pairing state has been entered. If no valid induction card is detected in the door lock within 8 seconds, the motor gearbox will make a "clack" sound and the key matching will end.

3.2 Keying operation process

After entering the key matching mode, use the induction card to approach the sensing area of the door lock. After successful key matching, the buzzer will emit a short beep. If the key matching fails, the buzzer will sound three beeps and the red light will flash 4-5 times.

Repeat the operation of step 2 until the key matching is completed, and you can also use the main control key to add the door opening sensor card at any time in the future.

3.4 Use a square tongue and repeat step 2 to unlock the key card.

4、 Delete all door cards: swipe the main control key (management card) three times in a row until you hear a long beep, then delete the door cards. After deleting the door opening card, the main control card remains unchanged.

5、 Open the door

5.1 Induction card key for opening the door

Approach the sensing area of the door lock with an effective sensing card, the buzzer beeps, the motor moves, the blue light lights up, indicating that the lock has been opened. After the door lock detects the opening action, it automatically locks the door; If no door opening action is detected, the blue light will turn off and the door will automatically lock after 5 seconds.

Note:

If the induction card is not a valid door key, the buzzer will emit three beeps of "beep, beep, beep" and the red light will turn on.

5.2 Mechanical key door opening

In any situation (such as low battery voltage or the door lock being in a locked state), the mechanical key can be used to unlock. When the mechanical key unlocks, the buzzer beeps briefly and the blue light lights up.

5.3 Normally open (channel) setting

Channel setting: Swipe the door card to open the door, hold down the handle, retract the lock tongue, keep it still, then swipe the door card again. The buzzer will beep once, the green light will go out, the motor will open the door, and the door will be in a normally open state (channel state).

Release channel status: swipe any door opening card, the buzzer beeps briefly, the blue light flashes once, the motor opens the door, press the handle (release channel status).

6、 Storage of mechanical keys

The mechanical key is the key to setting the master control key and can open the locked door, so the mechanical key must be properly kept by a dedicated person.