Foshan Pengrui Hydraulic Equipment Co., Ltd
Home>Products>Hydraulic tubing
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13798688899
  • Address
    No. 97 and 99, 2nd Road, Xiedi, Guidan Avenue, Xiebian Second Industrial Zone, Dali, Nanhai District, Foshan City
Contact Now
Hydraulic tubing
Product Introduction: If the hydraulic system is compared to the human body, then it can be said that hydraulic oil pipes are the blood vessels in the
Product details

    Hydraulic tubing

    If the hydraulic system is compared to the human body, then it can be said that hydraulic oil pipes are the blood vessels in the hydraulic system, mainly made of steel wire braided tubes.

    The structure of steel wire braided hydraulic oil pipe is composed of a liquid resistant synthetic rubber inner layer, middle layer, I or II or III layers of steel wire braided reinforcement layer, and synthetic rubber with excellent weather resistance.

    Specification range of hydraulic oil pipe:DN5mm~DN51mm。

    Characteristics of hydraulic oil pipes

    The hydraulic oil pipe is made of special synthetic rubber, which has excellent oil resistance, heat resistance, and aging resistance.

    Hydraulic oil pipes have high pressure bearing capacity and superior pulse performance.

    The tube body is tightly combined, soft to use, and has minimal deformation under pressure.

    Hydraulic oil pipes have excellent resistance to bending and fatigue.

    The length of the steel wire braided hydraulic oil pipe is large, with a fixed length of 20 meters for pipes with a diameter of over 32, and up to ten meters or even hundreds of meters for pipes with a diameter of less than 25.

    Pipeline layout requirements

    Pipelines should try to avoid areas with high or low temperatures such as high temperature radiation and cooling water spray, especially hydraulic oil pipe joints;

    The piping should not affect the operation of the host and other equipment, and should be safe, reliable, and convenient for work, observation, and maintenance;

    The pipe should be laid horizontally, vertically, neatly, and aesthetically pleasing. Try to minimize bends or small angle bends and use large arcs to reduce oil flow resistance;

    When there is a conflict during installation, the small pipe should be replaced by the large pipe, and the low pressure pipe should be replaced by the high pressure pipe;

    Pipelines should not come into contact when crossing each other and should be separated by a certain distance;

    The joints of parallel pipelines should be installed staggered to avoid affecting installation and disassembly;

    For easy disassembly and cleaning of pipelines, flexible joints should be installed appropriately, but they should be used sparingly to reduce the possibility of leakage.

    precautions

    The bending radius should not be less than the given bending radius to prevent damage to the hydraulic oil pipe skeleton or premature damage due to excessive stretching.

    According to the usage conditions, correctly select the type and specification of hydraulic oil pipe, and do not misuse or substitute it.

    When using hydraulic oil pipes, the pressure should be evenly and slowly adjusted to avoid sudden pressure increases that may damage the pipe body.

    When the workplace changes, it should be lifted off the ground and not dragged to avoid scratching the outer adhesive and corroding the skeleton layer.

    Transporting corrosive liquids, the interior should be cleaned thoroughly after use to prevent residues from corroding the pipe body for a long time, or corresponding series of products should be selected

    Four major advantages of Pengrui hydraulic products


    1、 Technology of hydraulic system

    1High quality, compact structure, and no leakage

    2Safe and stable system circuitRigorous process design ensures high energy utilization efficiency

    3Low noise, powerfulSuitable for high working frequencies

    2、 Cost of construction

    1. The hydraulic station uses Taiwan plug-in valve integrated blocks, which are compact, small in size, reduce connecting pipelines, decrease pressure loss, reduce leakage, improve work reliability, and reduce costs and operating expenses
    2. Positioning of cost estimation:Based on high cost-effectiveness
    3Imported and domestic hydraulic component brands are complete, with a wide variety of typesThe inventory of stock is large and comprehensive, and reasonable options can be achieved
    4. Through the technical solutions designed by our designers, we carefully select reasonable and high-quality hydraulic components, combine them into a hydraulic system, and can also customize according to the brand and price provided by the customer
    3、 After sales service of hydraulic system

    1be responsible forTechnical guidance for hydraulic station debugging,Lifetime maintenanceNormal use of hydraulic station
    2. Responding to customer technical inquiries,freeProvide relevant technical support
    3. A professional after-sales team, toAccurate, precise, and fastThe purpose of after-sales service
    4. To24-hour online service, the first timeContact after-sales customer service.
    5. First, help the customer solve the problem, then analyze the cause of the malfunction, and meet the urgent needs of the customer.
    4、 Worry free delivery time, manufacturer scale, industry experience

    11-7 days,There is a fixed professional installation team, and both parties can agree on a specific delivery date
    2. There are 20Years of industry experienceRepair, design, production, manufacturing, debugging, maintenance, one-stop service, directly matching with manufacturers

    Four major characteristics of Pengrui hydraulic products

    Long lifespan - stable performance

    Fine selection and review of materials, professional design of first-class equipment, and streamlined production processes

    Multiple varieties - complete range of categories

    Diverse varieties, can be customized one-on-one according to customer requirements

    Low power consumption - energy-saving and consumption reducing

    Application technology reduces energy consumption for customers, helps improve the energy efficiency ratio of machinery, and achieves energy conservation and consumption reduction

    High cost-effectiveness - reasonable price

    Professional production process, strong company strength, creating valuable products for customers


    Online inquiry
    • Contacts
    • Company
    • Telephone
    • Email
    • WeChat
    • Verification Code
    • Message Content

    Successful operation!

    Successful operation!

    Successful operation!