VIP member
How to use wet curtains to ventilate the workshop?
How to use wet curtains to ventilate the workshop?
Product details
How to use wet curtains to ventilate the workshop?
Keywords: wet curtain, workshop ventilation and air exchange, workshop ventilation and cooling
face, confrontFactory workshop coolingHow to cool down the factory workshop and what are the cooling methods? Let's briefly talk about these issues.
The cooling method for factory workshops is to solve the problem from the source of external heat sources. Te Yi Shu building insulation coating integrates reflection, radiation, and barrier, so that the roof iron sheet does not absorb heat to achieve cooling effect. After the construction of insulation coating on the roof, the roof temperature is between 40-45 degrees, and the internal cooling can reach 6-12 degrees (the main difference is the ventilation and tile material inside the factory workshop).
1. Prepare fans in the factory workshop. Fans are relatively economical, fast, and practical for the factory. But for better cooling, it is recommended that the injection mold factory workshop keep using only one high-power horn fan in front of each machine, which is not enough. It may only provide a blowing feeling, and if it is during the dog days, it is still hot and cannot cool down.
2. Cooling ice and fans are used in the factory workshop, but in high temperatures, the air blown out is often hot air. To keep the blowing wind cool, prepare a large plastic bucket in front of the fan, which contains large ice cubes. The wind blowing in this way will have a slight chill. As for ice cubes, the factory personnel can be unified to wholesale in the market, and the cooling effect can only reach one star! Because it's too troublesome and the cooling effect is not ideal.
3. Spray fans can also be used in the factory, but the humidity is too heavy, and the smoke affects the working line of sight.
4. Automatic sprinkler systems are installed on the roofs of the factory workshops, and on the top floor of each workshop, automatic sprinkler systems are installed to spray water several times at each sunny time point.
5. The roof of the factory workshop can be covered with a thermal insulation layer of about 10 centimeters, which can have a certain cooling effect.
6. Some iron roofs are equipped with natural wind bulbs and natural ventilators, which utilize the pressure difference and pressure between indoor and outdoor air to achieve natural ventilation and continuously provide fresh air indoors. For the following high-temperature workshops, this ventilation rate is not sufficient and cannot cool down.
Installing central air conditioning can be said to be better than the above three types, and the cooling effect is also good. But it is indeed a considerable expense. Many companies are currently installing central air conditioning in their die-casting workshops. Of course, the premise is that your factory has enough money to afford the extraordinary energy consumption, high investment, and high usage fees.
7. Many customers have the mentality of not spending a lot of money and wanting to improve the problem of high temperature and stuffiness in the workshop. Therefore, the most popular option is to install a water cooled air conditioner (commonly known as an environmentally friendly air conditioner or water air conditioner). This is more effective than using a fan, simpler than adding ice, and does not require buying ice specifically. The investment cost is not expensive, but it is more practical than the above two methods.
Effect after installation
Customer review 1: The indoor odor is not as strong as before, and it is much cooler;
Customer review 2: We used a thermometer during the acceptance inspection, and the temperature dropped by 6-7 degrees compared to before installation, but the effect was quite significant;
Customer review three: The air in the workshop is significantly better, and some employees take a nap in the workshop during their rest time;
Customer review four: Compared to central air conditioning, the cooling effect is not as significant, but the electricity cost is greatly reduced. Sometimes, when it is extremely hot, cabinet air conditioning can be used to achieve good results;
Customer review 5: Although the cooling effect on the workshop is not as fast as traditional air conditioning, the indoor temperature can be maintained at a moderate level after cooling, with a basic temperature of around 28-30 degrees Celsius;
After the installation of the equipment, the air quality in the factory building is significantly different from before installation, which can enhance the work efficiency of employees and improve their sense of belonging. At the same time, the factory's revenue will also take a big step forward.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-