Heavy hammer level gauge

Application of Heavy Hammer Level Gauge

Measure solid materials in powder, particle, and block form

Coal plants, power plants, steel mills

particular sexually

Chuanshuo Technology's heavy hammer level gauge has absorbed the advantages of similar products at home and abroad

Unique structure and transmission mode

Overcoming the common problems of many other forms of heavy hammer level gauges in the past

Can be remotely detected by computer remote control

Automatic and manual integration

Guided Technology's heavy hammer level gauge is reliable in operation, easy to detect, requires minimal maintenance, and has a wide range of applications

product description

The heavy hammer level gauge (primary gauge) is installed at the top of the silo, and the detection process of the level gauge sensor is controlled by the signal sent by the control display instrument (secondary gauge). The primary meter sensor consists of a reversible motor, lead screw, gear shaft, winding drum, sensitive lever, etc.

When the sensor receives a detection command, the motor rotates forward to drive the gear shaft and winding drum to rotate, causing the steel wire rope to lower and driving the heavy hammer to descend from the top of the warehouse. When the heavy hammer descends to the material surface and is lifted by the material surface, it loses weight. The steel wire rope relaxes, and the sensitive lever action makes the micro switch contact. The control display instrument immediately sends a motor reverse command when it receives this signal. The heavy hammer rises and returns until the winding drum touches the top switch, the motor stops, and the heavy hammer returns to its original position at the top of the warehouse, completing a detection process.

During this process, the control display instrument calculates the distance between the heavy hammer and the material surface by detecting the number of revolutions of the winding drum, displays it digitally on the panel, and outputs it on the rear panel terminal4~20mAelectric current(No need to add anything elseDC24V).

Technical Parameter

Sensor (primary meter)

measuring range: 0~8/16/32Rice (special specifications negotiable)

measurement accuracy:±1％

weight repeated sexually:±1％

divide distinguish rate:±3cm

Detecting speed:0.15m/s

measure measure belt:Stainless steel wire rope

Weight of Hammer:

1.5kg(0~16m)；2kg(0~32m)

Motor stalling torque5N.m

work Consumption:

90W

Environmental temperature:-10℃~+60℃

weight Quantity:

8rice50kg；16rice60kg；32rice75kg

External dimensions:

8Meter: Length430xtall220xwide350mm

16Meter: Length560xtall220xwide350mm

32Meter: Length730xtall220xwide350mm

50Meter: Length850xtall220xwide350mm +Bottom Φ195x110Bracket height Φ195x290mm

Control display instrument (secondary meter)

Power supply voltage:220VAC±10％；50/60Hz

work consume At rest: 15WDuring exercise105W(including one table)

ambient temperature: -30℃~+60℃

digital display: 4positionLEDDisplay the position of the material surface

current output: 4~20mA DC(No need to add any extra)24V）

Timed Time: 15~130Minutes (or as per user request)

Alarm method:Upper and lower limit alarm (optional)

weight measure: 2kg

Installation instructions:

Explanation 1: Installation location

Before installation, check the operation of the instrument and install it if there are no errors.

The primary gauge of this instrument is installed vertically and should avoid the discharge port. A protective cover must be added.