HX-LW series turbineflow meterThe sensor is based on the principle of torque balance and belongs to the speed type flow meter. Sensors have the characteristics of simple structure, lightweight, high accuracy, good reproducibility, sensitive response, and easy installation, maintenance, and use. They are widely used in industries such as petroleum, chemical, metallurgical, water supply, and papermaking, and are ideal instruments for flow measurement and energy conservation.

1. Caliber and connection method: (4, 6, 10, 15, 20, 25, 32, 40) mm with threaded connection
[(15, 20, 25, 32, 40) 50, 65, 80, 100, 125, 150, 200] mm using flange connection
2. Accuracy levels: 1.0, 0.5, 0.2
3. Range ratio: 1:10, 1:15, 1:20
4. Instrument material: 304, 316, 316L stainless steel, etc
5. Bearing medium temperature: (-20~120) ℃
6. Environmental conditions: Temperature: (-20~120) ℃; Relative humidity (5%~95%) RH;
7. Atmospheric pressure (86~106) kPa
8. Output signal
9. Sensor: Pulse frequency signal, low level ≤ 0.8V, high level ≥ 8V
10. Transmitter: two-wire 4-20mA Dc current signal
11. Power supply: Turbine flow sensor, Turbine flow transmitter: DC24V
12. Local display type: instrument with 3.6V lithium battery
13. Signal transmission line: Three signal or two core shielded cable with an area of 0.3 square meters or more
14. Transmission distance: ≤ 500m
15. Signal line interface: M20X1.5 internal thread
16. Explosion proof grade: Basic type: Non explosion proof product; Explosion proof type: Exd Ⅱ BT6
17. Protection level Ip65
18. The flow range and pressure level are as follows: