Nanjing Teyun Machinery Manufacturing Co., Ltd
Home>Products>HPA-125 fully automatic horizontal waste paper baler
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    0086-1395208390813376077792
  • Address
    Mingjue Industrial Park, Lishui County, Nanjing City
Contact Now
HPA-125 fully automatic horizontal waste paper baler
With the gradual increase of our environmental awareness, we have developed a waste paper baler. The waste paper baler is used to squeeze and solidify
Product details

With the gradual increase of our environmental awareness, we have developed a waste paper baler. The waste paper baler is used to squeeze and solidify waste paper and similar products under normal conditions, and package them with special packaging belts to greatly reduce their volume, thereby reducing transportation volume, saving transportation costs, and increasing efficiency for enterprises.

Product Usage:

Suitable for packaging loose materials such as waste paper (cardboard boxes, newspapers, etc.), waste plastics (plastic film, turnover boxes, PET bottles, etc.), straw, etc.

Product performance and features:

1. Horizontal structure, can be equipped with conveyor belt feeding or manual feeding.

2. Button operation, PLC control, safe and reliable.

3. Manual bundling.

When the waste paper baler is working, if there is a malfunction, the repair methods include:

1. The reasons for sudden abnormal noise caused by the normal operation of the motor and pump of the waste paper baler include: damaged motor bearings; Electric motor operates in phase loss mode;

2. The reasons why the motor of the waste paper baler cannot start are: the power supply is not connected; The fuse is blown; Overload protection action; Control equipment wiring error.

3. The reason for strong vibration during the operation of the waste paper baler motor is that the motor and the mechanical center it drives are not consistent; Coupling malfunction; The unit has lost balance, the foundation is not solid, and the rotor is scheduled to collide with the sweeping chamber.

Product workflow:

1. After the paper or other materials of the waste paper baler arrive at the position, press the remote control's tightening button, and the red alarm light will flash. After the pressure head is pressed in place, it will automatically move forward and stop (if the tightening is started and the pressure head moves to a certain position without stopping and continues for tens of seconds, it will automatically return to its original position, and the alarm will sound at a frequency of 1 second during the return. At this time, the automatic alarm arm will be triggered. Press the remote control's arm to release the arm, and then start the tightening process until it is normal and no longer alarms.

2. Place the magnetic switch on the remote control into the card slot, press the system start button on the remote control twice, the alarm siren will sound for 10 seconds, and the warning device will stop running. The red warning light will remain on.

Before starting up, reflect on whether the appearance of the waste paper baler equipment is abnormal, whether there are any safety hazards around it, and whether there are sufficient iron or plastic ropes.

After completing the task, press the remote control system stop button, remove the magnetic switch, press the emergency stop switch on the electrical control box, and block the main power supply. 5. Press the start button on the remote control to activate the conveyor belt. Push the cardboard or other materials into the feeding port, and the conveyor belt will bring the materials into the packaging entrance. Manually press the arm with a jack on both sides of the arm, rotate the screws evenly on both sides, and then start tightening until there is no alarm.

6. Repeat the 4 operations until the required packaging length is reached. Press and hold the bundling button on the remote control for 2 seconds, and the device will automatically start. When the pressure head reaches the forefront bundling position, the machine will stop. Once it is in place, the alarm will sound at a frequency of 3 seconds.

7. Press the threading button on the remote control, and the threading machine will automatically thread the iron wire or plastic rope. The threading machine will return to its original position, and the bags at the exit will be pushed out one by one. Use a trolley or forklift to move the finished bags to a suitable location and place them evenly. After confirming that everything is normal, turn on the main air switch of the distribution box, unscrew the emergency stop button, and the power indicator light of the electrical control box will light up.

8. Tie and cut the wire or rope of the waste paper baler, and complete one pack.

9. Turn the remote control local gear selection switch to the remote control gear.

At present, the advanced horizontal balers on the market mainly consist of feeding devices, transmission devices, feeding devices, cutting devices, crushing devices, filtering devices, throwing devices, walking devices, protective devices, traction devices, etc. The structure of the waste paper baler is reasonable, the operation of the equipment is simpler, and the degree of automation is gradually improving. Currently, the waste paper baler on the market can be used to process crop straw such as corn straw, soybean straw, and peanut seedlings. China is a major agricultural country, which provides abundant raw materials for waste paper balers. Better guarantee of its production.


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!