GX-1104 Ball Pressure Tester Introduction:

1. Made according to standards such as GB4706.1-2005, GB2099.1-2008, GB/T5159.21-2006, IEC60695-10-2:2003, etc.

2. The ball pressure test is to press a specified steel ball (R2.5mm) and a ball pressure tester with a total test force of 20N ± 0.2N onto the surface of a test sample placed in a heating box in a horizontal state. After 60 minutes+2 minutes/0 minutes at the specified temperature of the test sample, the test sample is quickly (<10 seconds) immersed in water at 20 ℃± 5 ℃ and cooled for 6 minutes ± 2 minutes. The diameter of the indentation on the surface of the test sample is measured within 3 minutes after being removed from the water, and the heat resistance deformation ability of the test sample at the specified temperature is evaluated by whether the indentation diameter exceeds 2mm.

GX-1104 Ball Pressure Tester Technical Parameters:

1. Ball diameter: 5mm (R2.5mm)

2. Total test pressure: 20N ± 0.2N

3. Sample support: solid stainless steel cylinder with a diameter of 50mm and a length of 100mm

4. Material: All made of stainless steel material

5. Reference standards: GB4706.1-2005, GB2099.1-2008, GB/T5159.21-2006, IEC60695-10-2:2003

Note: The ball pressure tester requires an additional high-temperature chamber (oven) to be used in conjunction with it