g typesingle-screw pumpIt works according to the principle of rotary meshing displacement, and the main working components are the eccentric screw (rotor) and the fixed bushing (stator).Due to the geometric shape of these two components, they form separate sealed chambers, and the medium flows uniformly in the axial direction. The internal flow velocity is low, the volume remains constant, and the pressure is stable, so there will be no vortex or agitation. The output pressure of each stage pump is 0.6MPa, with a head of 60m (for clean water) and a self-priming capacity of 6m. It is suitable for conveying medium temperatures below 80 ℃ (special requirements can reach up to 150 ℃).Due to the selection of multiple elastic materials for the stator, this pump has characteristics that general pump types cannot handle for transporting high viscosity fluids and media containing hard suspended particles or fiber media. Its flow rate is proportional to the rotational speed.Transmission can be achieved directly through couplings, or through devices such as variable speed motors, V-belts, gearboxes, etc.