Measurement range: from 0.00 to 20.00ppm
Reproducibility: 0.05ppm
Accuracy: ± 0.1ppm when<1ppm; >At 1ppm, ± 0.2ppm
Sensitivity: ± 0.05% of full scale
Response time: 90%<><90 seconds,>90 seconds at 20 ℃,>
<90 seconds, at 20 ℃>Probe material: Noryl and 316 SS stainless steel
Sensor cap material: polybutylene synthetic rubber
Temperature range: 0.0~50 ℃
Temperature compensation: NTC 30K Ohm resistor; automatic temperature compensation
Sensor cable: standard length of 10m, with a quick disconnect plug. The additional sensor length can be increased by using junction boxes and extra cable length
Large distance from analyzer to sensor: 300m
Interference: Not affected by the following substances: H2S,pH,K+,Na+,Mg2+,Ca2+,NH4+,AL3+,Pb2+,Cd2+,Zn2+,Cr(tot),Fe2+,Fe3+,Mn2+,Cu2+,Mi2+,Co2+,CN-,NO3-,SO42-,S2-,PO43-,Cl-, Crude oil, Cl2
Sample temperature: 0-100.0 ℃
Analog output (1 and 2): 0.00~20.00mA or 4.00~20.00mA
Environmental temperature: Operation: -20~60 ℃; 0-95% relative humidity, no condensation
Storage: -30~70 ℃; 0-95% relative humidity, no condensation