FTC260-AB4B1 Original E+H Capacitive Liquid SwitchNo calibration required, suitable for dust explosion-proof areas.
application
Minicap is designed for limit detection of lightweight powdered materials, such as granular products, flour, milk powder, animal feed, cement, lime, or gypsum.
Model:
·Minicap FTC 260 with 140mm rod probe, suitable for bulk and liquid materials
·Minicap FTC 262 with up to 6m cable probe, suitable for bulk materials
·Relay output (passive contacts/SPDT) with AC or DC power supply
·Equipped with a three wire PNP output DC power supply
Product Performance
·Composed of probes and electronic plugins: - easy to install - can be activated without calibration
·Effective adhesive compensation - even when there are many adhesives on the probe, there is still the correct switch point - the safety of operation is high
·Mechanical structure - no easily worn parts - long working life - no maintenance required, meets the requirements of IEC61508 functional safety SIL2, and can be applied in safety systems
·Minicap FTC 262 cable probe can be shortened - optimized for measurement matching in the warehouse - requiring fewer spare parts
2 Nivector FTC968
Limit measurement of integrated capacitive dust or small particle solids
FTC260-AB4B1 Original E+H Capacitive Liquid Switchapplication
The scope is an integrated capacitive limit switch used for measuring dust or small solid particles (with a maximum particle size of 10mm). Can be used for measuring food. The nivctor FTC 968Z is designed for use in dust explosion-proof areas.
Typical applications: plastic pellets, laundry detergent, grains, sugar, spices, wheat flour, animal feed
Product Performance
·No calibration required: quick and economical operation
·No movable parts: no wear and tear, long service life
·Anti electromagnetic interference and peak voltage: reliable operation
·The switch status can be seen from outside the tank: easy to operate
·Equipped with installation adapter: perform functional testing on silo injection and protect limit switches
Limit/Solid
measuring principle | Solid state capacitor switch |
Features/Applications | Integrated rod sensor with adhesive compensation function |
LaunchPad | |
Power/Communication | 10.8...45 V DC,DC-PNP, Three-wire |
20...253 V AC, perhaps | |
20...55 V DC, Relay | |
ambient temperature | -40 °C...+80 °C (-40 °F...+176 °F) |
process temperature | -40 °C...+130 °C (-40 °F...+266 °F) |
Process pressure (absolute pressure)/maximum overpressure limit value | -1...25 bar (-14.5...360 psi) |
Main liquid receiving components | PPS (Polyphenylene Sulfide) |
(Glass fiber content is about 40%) | |
Process connection | R1' |
NPT1' | |
sensor length | 140 mm (5.51') |
output | PNP transistor output |
Relay output (equipotential switching contact/SPDT) | |
Certificate/Certification | ATEX |
FM | |
CSA | |
WHG | |
characteristic | FDA certified materials |
Application Restrictions | Solid particle size: Max. Max. 30 mm (1.2 ') |
DK min 1.6 | |
Tensile strength: 1400 N (top of sensor) |