VIP member
FS4000 Series Miniature Gas Mass Flow Sensor - Copy
FS4000 series miniature gas mass flow sensor product introduction: The FS4000 series mass flow meter is designed for flow measurement of low-speed air
Product details
FS4000Series of miniature gas mass flow sensors
Product Introduction:FS4000Series quality flow meters are designed specifically for pipe diameters of3mmarrive8mmDesigned for measuring the flow rate of low-speed airflow in gas pipelines. The bayonet design provides users with easy installation and meets their needs for measuring multiple gas pipelines. Plastic card holders can easily perform mechanical interface conversion and are suitable for different low-cost environments. This table can be used as an electronic watch for anesthesia machines and can also be applied to other industries.
Product features:
-Specially designed for pipe diameters3mm-8mmDesigned for measuring the flow rate of low-speed airflow in gas pipelines and recording fluid data statistics
-Various connection methods, easy to install and use
-short response time
-Excellent performance on anesthesia machine electronic watch
-Variable mechanical connection method can be easily installed in different application environments
-Built in security plugins can be applied to a wider range of applications
Technical parameters:
performance parameter |
FS4003 |
FS4008 |
unit |
open up or clear out by poking or jabbing footpath |
3 |
8 |
mm |
maximum flow |
2, 3, 4, 5 |
10, 20, 30, 40, 50 |
SLPM |
Range ratio |
100:1 |
||
refined linear measure |
±(1.5+0.2FS) |
% |
|
repeatability |
0.25 |
% |
|
Zero point output drift |
±30 |
mV |
|
Output drift |
±0.12 |
%/℃ |
|
response time |
10(By default,20，50，100，200，500，1000Can be set) |
||
Working power supply |
8 ~ 24Vdc,50mA |
||
Output |
RS485，RS232Simulate voltage0.5~4.5Vdc |
||
Display mode |
Not supporting display |
||
Indicating unit |
Instantaneous flow rate:SLMP;Accumulated traffic:SL |
||
Maximum flow pressure loss |
100 |
600 |
Pa |
Maximum working pressure |
0.5 |
MPa |
|
operation temperature |
-10 ~ +55 |
℃ |
|
storage temperature |
-20 ~ +65 |
℃ |
|
Working humidity |
<95(No ice or condensation) |
%RH |
|
mechanical interface |
BSPT1/4(R1/4),4mm/6mm/8mmquick connector |
||
lead wire |
5Needle socket, equipped with0.5mcable |
||
Standard calibration gas |
Air (or other gases),20°C， 101.325kPa |
||
weight |
57(With)R1/4,） |
||
Mechanical dimensions:
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-