FPZ plastic self-priming pump product overview:

The FPZ self-priming pump is made of reinforced polypropylene (CFR-PP) through one-time injection molding, which has high mechanical strength and strong corrosion resistance. The self-priming pump has a unique scientific structure, and the pump chamber is equipped with a suction chamber, a storage chamber, a return check valve, a gas-liquid separation chamber, and a return hole. Just need to inject the liquid before the first start-up, there is no need to repeat the injection in the future. When suctioning the medium, the liquid can be intermittent. Within 15 minutes of interruption, the liquid can continue to be suctioned. The mechanical seal does not require additional cooling water, making it easy to operate, safe, and leak free. It is an excellent product to replace the submersible pump. CFR-PP material: non-toxic, non polluting, resistant to general acids, bases, and salts, with a working temperature range of -14 ℃ to 80 ℃.

Product features of FPZ plastic self-priming pump:

It has the advantages of small size, light weight, simple structure, convenient use, high efficiency, and low price. The inner cavity of the pump body is smooth, the impeller is closed, and two types of mechanical seals and rubber ring seals are used. The entire shaft is made of stainless steel and connected with a sleeve. The temperature of the conveying medium is -20 ℃~80 ℃, the flow rate is 4-25m3/h, the head is 7-25m, the speed is 2900r/min

FPZ type plastic self-priming pump is mainly used for:

Mainly used for transporting corrosive liquids such as acids, bases, and salts, but not for transporting chemicals that have a significant effect on ABS engineering plastics, such as aromatic hydrocarbons, halogenated derivatives of fatty hydrocarbons, ketones, and concentrated acids and bases.

Performance parameters of FPZ plastic self-priming pump: