FMI51-A1TDJA1A1D tuning fork level gaugeIt is a fully insulated rod probe that can monitor liquid levels in various liquids and effectively measure in media that are prone to adhesion and at extremely high temperatures. The measurement is not affected by the dielectric constant (dc). Compared to Fieldgate FXA320 (remotely querying measurement values through Internet technology)
Matching use is an ideal choice for inventory management solutions.
Compliant with the IEC 61508 standard, it can be used in safety systems with a functional safety level of SIL2 and has multiple certificates and certifications.

The instrument is not affected by the dielectric constant (dc), the conductivity of the liquid is 100 μ S/cm, and it allows measurement of multiple liquids without the need for recalibration.

Process connection: flange and thread

Process pressure: -1...+100 bar (+1.450 psi)

Measurement range: 0.1... 4.0 m (0.3... 13 ft)

Temperature: -80...+200 ° C (-112...+392 ° F)

FMI51-A1TDJA1A1D tuning fork level gaugeInternational explosion-proof protection certification, overflow protection WHG, SIL, sanitary certification, classification certification

Features and specifications
Continuous liquid level measurement
measuring principle

Capacitive level gauge

Features/Applications

Fully insulated rod probe, suitable for standard and harsh working conditions (temperature, process, adhesion)

Interface measurement

Liquid/liquid interface with lotion layer

characteristic

Shield segment length
Factory calibration
short response time

Power/Communication

12...36 DC HART
PFM

measurement accuracy

Repeatability is 0.1%

Linear error in measurement of conductive liquids

<0.25%

ambient temperature

-50...+70°C
-58...+158°F

process temperature

-80...200°C
-112...392°F

Process pressure (absolute pressure)/maximum overpressure limit value

Vacuum ..100 bar
(Vacuum... 1450 psi)

Main liquid receiving components

Insulation materials: PTFE, PFA
316L

Process connection

G1/2、G 3/4、G 1、G1 1/2 /NPT 1/2、NPT 3/4、NPT 1'、NPT1 1/2
Minimum flange diameter DN25.../ASME 1 '.../JIS