● Target audience

Liquid, gas or vapor

● Measurement range

Gauge pressure: 0-2kPa to 7MPa;

Absolute pressure: 0-20kPa to 100kPa;

Negative pressure: -100kPa~7MPa

● Output

4～20mADC

● Power supply

12～30VDC

● Load characteristics

4-20mADC two-wire load R ≤ 50 (V-12) Ω

● Temperature range

Environmental temperature -20 ℃~+70 ℃; Standard medium temperature -20 ℃~+80 ℃

● Shell protection

Better than IP65

Explosion proof type

Explosion proof Exd Ⅱ CT6; The intrinsic safety Exia Ⅱ CT6 should be equipped with an external safety barrier

● Accuracy

Accuracy level: ± 0.25%, ± 0.5%

● Stability

Better than ± 0.1% FS/year

● Temperature impact

Within the range of -20 ℃ to+70 ℃, the variation is less than ± 0.18%/10 ℃

● Vibration impact

When the vibration frequency is 20-200Hz in any direction, the change is less than ± 0.02% FS

● Impact impact

After a 100G impact in any direction for 11ms, the change is less than ± 0.02% FS

● Load impact

As long as the terminal voltage of the input transmitter is higher than 12V, there will be no load impact.

● Location impact

The installation position does not affect the zero point

● Structural materials

Diaphragm: Aluminum oxide ceramic

Shell: Polyurethane baked paint low copper cast aluminum alloy

FB0802 pressure transmitter contact medium material: stainless steel 316L

O-ring sealing structure: polytetrafluoroethylene or fluororubber

● Process connection

Standard M20 × 1.5 external thread provided

● Electrical connection

It can be led out from any outlet as needed, suitable for industrial cables with diameters ranging from φ 8.5 to φ 10.0 as leads for sealing The universal cable connector PG16 or M20 × 1.5 can be used for the lead out joint, and the non lead end should be sealed with an end cap.

FB0803G diaphragm pressure transmitter

FB0803 Precision/Sanitary Diffusion Silicon Pressure Transmitter

FB0803 Industrial Diffusion Silicon Pressure Transmitter

FB0802 Ceramic Capacitive Pressure Transmitter