Technical Specifications:
Sensor: Mini zirconia sensor with built-in heater
Measurement range: 0-1000ppm O2, * large range 1% O2
Display: 0.75 "(19.05mm) LED digital display, display accuracy: XXXX. X System status LED indicator light: yellow light in case of fault, green light for normal and online measurement Alarm 1 and 2 alarm indicator lights
Response time:<15 seconds T90 flow rate of 500ml/min when PPM concentration changes
Accuracy (at fixed temperature and pressure):
± 3PPM between 0-50PPM; (When calibrated using two-point calibration method, the time is ± 1ppm)
± 5PPM between 51-500PPM;
± 10PPM within 501-2000PPM; O2
Operating temperature: 0-45 ℃
Signal output: RS-232 communication interface, 4-20mA, 0-10VDC (or 0-1VDC, 0-5VDC, 0-10VDC)
Preheating time: about 2 minutes
Working power supply: 90-250VAC 50/60HZ 100W
Power connection: 2-meter power cable, ON/OFF switch
Sample gas interface: 1/8 "NPT internal thread
Storage temperature: -15 to+50 ℃
Humidity: 0-95% without condensation
Sample gas flow rate: 0.4-1/min constant pressure
Quality assurance: Electronic components and sensors: 1 year
Weight: less than 2.2KG
| Measuring Range: | 0-100 ppm, 0 - 1000 ppm auto |
| Accuracy: | ±2.0% of range at CTP or ±3 ppm |
| Enclosure Rating: | Ctrl panel: WeathrproofNEMA 4 (IP66)Rear electronic chassis:Nema 1, IP20 |
| Response Time: | T90 < 10 sec |
| Display Size: | 7 seg. 0.75" LED4 alphanumeric characters;LEDs for system status: run,/fault/alarm 1/alarm 2 |
| Power: | 90 - 264 VAC or 24 VDC |
| Analog Communications: | Serial RS-232 service portAnalog 0-1, 0-5,0-10 VDCand 4-20 mA |
| Relay Rating: | 2 alarm relays, field adjustable 1 system fault relay, non-adj |
| Ambient Temperature: | 41 to 104°F (5 to 40°C) |
| Humidity: | 0 to 95% RH (non-condensing) |
| Sensor Type: | Mini-Zirconia ZR400 |
| Expected Sensor Service Life: | 3 to 4 Years |
| Warranty: | Analyzer: 1 YearSensor: 6 months |
