VIP member
Electronic metal tensile testing machine
The metal tensile testing machine is used to measure the impact resistance of metal materials under dynamic loads.
Product details

Maintenance and functions of metal tensile testing machine
The metal tensile testing machine can test and analyze the mechanical properties of various metals, non metals, and composite materials. It is widely used in aerospace, petrochemicals, machinery manufacturing, wires, cables, textiles, fibers, plastics, rubber, ceramics, food, pharmaceutical packaging, aluminum-plastic pipes, plastic doors and windows, geotextiles, films, wood, paper, metal materials, and manufacturing industries. It can automatically calculate the maximum test force value, fracture force value, and other test data.
When using the Tiancheng Instrument tensile testing machine, there are several points we should pay attention to when maintaining the tensile testing machine.
1. Before the experiment, it is necessary to ensure that the system is preheated for at least 20 minutes to minimize the impact of temperature drift.
2. The buffer oil should be kept clean, and if the oil level is less than two-thirds of the cylinder depth, it should be replaced immediately.
3. Before starting up, check if lubricating oil should be added to the friction moving parts.
4. Before adding the test piece, the brake handle must be stuck and released after adding the test piece.
5. The main bearing of the dynamometer is not allowed to be oiled. The friction wheel surface inside the gearbox must not be oiled or splashed with oil stains. The friction surface should be absolutely clean and the inclined block on the swing arm should not be violently impacted.
6. After the experiment is completed and the power is cut off, clean the surface of the testing machine and provide timely protection.
7. On average, the tensile machine is maintained twice a month.
Function and function of metal tensile testing machine:
The computer monitor displays the entire test process and curve, and the microcomputer automatically transmits the test settings and data. Users can modify the test report according to their own requirements and output standard reports. By analyzing the superposition of grouped experimental curves, quality control parameters can be accurately grasped. The multi-modal data query function can enable managers to clearly grasp the development and changing trends of quality control. Specially designed software features enable testers to quantitatively grasp the state parameters of key points in the application process of test materials, accurately adjust the process and control production.
technical specifications
model | TC-9000BA5TC-9000BA10TC-9000BA20TC-9000BA30 |
capacity selection | 50KN 100KN 200KN 300KN |
Unit switching | Kg f,lb f,N,KN,k pa ,Mp a |
Load decomposition degree | 1/500.000 or specified |
Load accuracy | ±0.25% |
Power amplification factor | Wu Duan |
Maximum travel (excluding fixtures) | 1050mm |
Effective width | 570mm |
test speed | 0.001~500 mm/min can be set0.01~250 mm/min |
speed accuracy | ±0.5% |
Displacement resolution | 0.00003 mm |
Online inquiry