The electric vibration table testing system is designed and manufactured according to standards such as IEC60068, IEC68-2-6, JJG189-97, GB/T13309-91, and GB2423. The device includes a controller that can control all operations and record and save test data.

LVD-100KG: Includes a four-dimensional vibration table, both vertically and horizontally.
LVD-100KG-6D: Includes a six degree spatial vibration table, vertical, left-right horizontal, and front back horizontal directions.

Technical Specifications:
Sine wave, frequency modulation, sweep frequency, programmable, frequency doubling, logarithmic, high acceleration, amplitude control, and time control, etc. The controller can control all operations, and the operation is simple and easy to set acceleration and amplitude.

Vibration table size: 500mm * 500mm (other sizes can be customized)
• Amplitude: 0-5mm (adjustable). Vibration waveform: sine wave (half wave, full wave). Vibration acceleration: 0~20g (adjustable).
Maximum weight load of test sample: 100KG
• Accuracy: The frequency can be displayed as 0.01 Hz. Accuracy is 0.1 Hz
Sweep frequency function (1-600Hz): (up frequency/down frequency/time range) can be freely set to true standard back and forth sweep frequency.
• Programmable function (1-600Hz): 1-15 segments, each segment's time and frequency can be set arbitrarily to achieve cyclic detection function, which can be cycled.
Frequency doubling function (1~600Hz): 15 stage doubling:
1) Low frequency
2) High frequency to low frequency
3) From low to high and then to low frequency, it can be recycled and reused
Logarithmic function (1~600Hz), 3 types of logarithms/reusable:
1) Low frequency to high frequency
2) Up to down frequency
3) From low to high and then decrease the frequency
• Measuring instruments: display amplitude, acceleration, and maximum acceleration