Shenzhen Anyitaike Technology Co., Ltd
Home>Products>E+H FTC262 capacitor level switch
E+H FTC262 capacitor level switch
The E+H FTC262 capacitor level switch has a simple structure, is economical and practical, and is used for solid bulk material limit detection, especi
Product details

E+H FTC262 capacitor level switchSimple structure, economical and practical, used for solid bulk material limit detection, especially suitable for corrosive or highly adhesive media. This probe is designed for limit detection of lightweight solid bulk materials, with typical applications including grains, flour, milk powder, animal feed, cement, talcum powder, or gypsum.

advantage

  • The measurement system consists of probes and electronic components:
    ——Easy installation
    ——No calibration at startup

  • Built in adhesion compensation:
    ——Even if the probe has strong adhesion, it can still maintain precise switching action
    ——High operational safety

  • Mechanical components are sturdy:
    ——Wear free components
    ——Long service life
    ——Maintenance free

  • Minicap FTC262 cable probe can be truncated
    -Optimize the length to match the measurement points inside the silo
    -Reduce inventory

E+H FTC262 capacitor level switchapplication area

Minicap is designed specifically for limit detection of lightweight solid bulk materials, with a maximum particle size of 30mm and a dielectric constant of ε r ≥ 1.6. Typical applications: grains, flour, milk powder, animal feed, cement, talcum powder or gypsum.
model:

  • Minicap FTC262: equipped with a maximum 6-meter cable probe for measuring solid bulk materials

  • Relay output with AC or DC power supply (backup auxiliary conversion power supply/SPDT)

  • PNP output with 3-wire DC power supply

measuring principle

Solid capacitor

Features/Applications

No calibration required, direct start, automatic adhesion compensation, easily truncated cable probe

Power/Communication

10,8 . .. 45V DC, Three wire DC-PNP: 20... 253V AC or 20 .. 55V DC, Relay output

ambient temperature

  • -40 . .. + 80℃

process temperature

  • -40 . .. + 80℃

Process absolute pressure/maximum overpressure limit

-1 . .. +6 bar

Contact medium components

PPS (glass fiber content of about 40%)

ultimate tensile strength

3000 N

Process connection

1 1/2 BSPT (R 1 1/2, ISO 7/1),1 1/2 NPT

sensor length

Minimum 500 mm, maximum 6000 mm

output

PNP transistor output, relay output

Certificates and certifications

ATEX,FM,CSA,WHG

optional

Aluminium Housing

characteristic

The cable type truncation part shall be provided by the user themselves

Application limitations

The maximum diameter of the granular solid material is 30 mm, the DK value is less than 1.5, and the flexural strength is 1400 N (at the probe tip)


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!