Double sided dual head CNC lathe (model: KEL-BOS-J72 P)

1、 1Outline drawing of double-sided double head machining CNC lathe (model: KEL-BOS-J72 P)As follows

2Double sided dual head machining CNC lathe (model: KEL-BOS-J72 P) structural diagramAs follows

II(Double sided dual head CNC lathe)Working principle

Step 1: Feeding action

First, fill the material in the inclined plate device, and the feeding device will follow the right sliding plate to reach below the inclined plateThe cylinder on the inclined plate device operates, and the workpiece falls into the feeding device The feeding device follows the movement of the right skateboard to feed the workpiece to the center position of the chuck, and the pushing cylinder on the feeding device moves to feed the material into the chuck.

Step 2: Positioning

When the feeding device reaches the center of the chuck, the left positioning tool holder follows the sliding plate to the other side of the workpiece, and the pushing rod is in front of the workpiece to achieve workpiece positioning

Step 3: Clamping

After the workpiece is positioned, the clamping cylinder works to clamp the workpiece.

Step 3: Turning

Spindle start, feed slide1 and feed slide 2 work simultaneously to achieve simultaneous processing of both ends of the workpiece.

Step 4: Discharge

The clamp is released, and the discharge chute moves to the receiving position. The loaded feeding device reaches the front of the workpiece, and the cylinder extends to push out the processed material. At the same time, the workpiece to be processed is pushed into the clamp, completing the discharge and feeding action.

The iron chip groove is located below the spindle processing end, and the processed iron chips basically fall into it.

The billet is a straight pipe, the outer circle does not require processing, and the total length of the workpiece has a surplus2mmwithin

Pipe diameter requirements:20-50mm, thickness5mm, Length:140-360mm

Processing location: First end:1.Car end face2.Inside the outer diameter of the car

Second end:1.Car end face2. Car outer diameter inner hole

4(Double sided dual head CNC lathe)Technical Parameter

5(Double sided dual head CNC lathe)Other configurations

VI(Double sided dual head CNC lathe)Machine technical indicators

Machine working environment: Room temperature:-10°—40°

Average humidity:65%

Tool standard: Design the tool holder according to the tool parameters provided by the manufacturer.

Fixture standards: The standards are provided by the design manufacturer and purchased by the purchasing manufacturer themselves.

Product specifications: Production drawings provided by the manufacturer.

7(Double sided dual head CNC lathe)Internal structure diagram

8(Double sided dual head CNC lathe)Taiwan lead screw track

Using Taiwan Shangyin or Taiwan Yintai screws and tracks to ensure the accuracy, stability, and reliability of the airport

9(Double sided dual head CNC lathe)Spindle clamp seat

1. Adopting Taiwan spindle clamp seat

10(Double sided dual head CNC lathe)Numerical Control Operating System

1. Adopting Taiwan Baoyuan dual channel system to ensure the stability and accuracy of CNC operation