1. The working principle of the disinfectant dispenser is to use an electromagnetic diaphragm pump to add disinfectant solution (with a saturated effective chlorine concentration of 1%) to the water to be disinfected. This equipment operates safely and reliably, occupies a small space, and is easy to operate and manage. Therefore, it has been widely used in the field of water disinfection.

2. The equipment power supply adopts AC 220V.

3. Pharmaceutical preparation: Add 3 kilograms of disinfectant powder or tablets to the equipment, connect the power and tap water, press the "Power" and "Run" buttons on the microcomputer controller, the indicator lights will be on, and the equipment will automatically add water to the high liquid level switch for automatic dispensing. Let it stand for half an hour to prepare a disinfectant with an effective chlorine concentration of 1%.

4. Disinfectant disinfection method: Unit g/m3

5. Equipment startup: Press "power" to "run" the metering pump (when controlling locally, do not press "remote control", otherwise the output cannot be adjusted), and adjust the metering pump pulse according to the required dosage.

6. Equipment shutdown: Press the "Run" button to stop dosing the system. When the system is shut down for a long time, press the "power" button to cut off the power.

7. Attention:

When the equipment is running normally, it should be ensured that there is excess disinfectant inside the equipment to prevent the disinfectant from running out and affecting the disinfection effect.