Digital traffic integrator
explain:
① Suitable without the needtemperature、Pressure Compensationofinternet trafficMeasurement and Accumulation
② Flow transmitters with various types of current, voltage, or pulse outputs
③ 8-bit cumulative quantity, 5-digit instantaneous quantity display, basic error better than ± 0.2% F · S
④ Nonlinear function of 8-segment line correction transmitter
⑤ Dimensions: 160 × 80 (horizontal/vertical), 96 × 48 (single display), 96 × 96
⑥ Instrument power supply 220V AC, (9~24) V DC
Basic configuration:
Dual display, external transmitter power supply
Extended functions:
① Alarm output, up to 2 points
② Transmission output or cumulative pulse output
③ Communication interface: RS 232 or RS 485
④ Printer interface (excluding printer unit)
⑤ Power outage record (anti-theft function)
model selectionoutside
content |
Code and Description |
||||||||||||||
DZXSJ |
Dual display, external transmitter power supply |
||||||||||||||
External dimensions |
A |
Horizontal 160 × 80 × 125 or vertical 80 × 160 × 125 |
|||||||||||||
B |
96×96×112 |
||||||||||||||
C |
96 × 48 × 112, can only display horizontally as a single display |
||||||||||||||
Panel form |
H |
horizontal type |
|||||||||||||
S |
Vertical |
||||||||||||||
F |
square |
||||||||||||||
Display mode |
1 |
8-bit LED single display, cumulative value and instantaneous value switching display (limited to C-type instruments) |
|||||||||||||
2 |
8-bit+4-digit LED dual display, cumulative value and instantaneous value displayed simultaneously (limited to A and B types) |
||||||||||||||
Input signal (Note 1) |
I |
dc current |
|||||||||||||
V |
DC Voltage |
||||||||||||||
K |
Inputs |
||||||||||||||
Number of alarm points |
T□ |
T0: No alarm T1~T2: 1~2 point alarm |
|||||||||||||
External power supply |
B0 |
No external power supply |
|||||||||||||
B1 |
External supply 24V DC, error less than ± 5%, 50mA |
||||||||||||||
B2 |
External supply 12V DC, error less than ± 5%, 50mA |
||||||||||||||
B3 |
other |
||||||||||||||
Transmission output (Independent power supply, fully isolated) |
A0 |
no-output |
|||||||||||||
A1 |
Current output (4~20) mA, (0~10) mA, or (0~20) mA |
||||||||||||||
A2 |
Voltage output (0~5) V, (1~5) V |
||||||||||||||
A3 |
Voltage output (0~10) V |
||||||||||||||
A4 |
Other outputs |
||||||||||||||
communication interface (Independent power supply, fully isolated, 2400~19.2K instrument address 0~99, response delay less than 500 μ s) |
S0 |
No communication interface |
|||||||||||||
S1 |
rs-232 interface |
||||||||||||||
S2 |
RS-485 interface |
||||||||||||||
S3 |
RS 422 interface |
||||||||||||||
Instrument power supply |
V0 |
220V AC |
|||||||||||||
V1 |
24V DC |
||||||||||||||
V2 |
12V DC |
||||||||||||||
Printing function (limited to A and B type instruments) (with hardware clock) |
P |
P represents the printing interface, which can be omitted if not included |
|||||||||||||
Power outage recording function (limited to dual display instruments, not included and can be omitted) |
D |
D means with power outage recording function |
|||||||||||||
Accumulated pulse output |
0 |
0 indicates the presence of cumulative pulse output function |
|||||||||||||
Non standard functions |
N |
N represents non-standard function |