Digital intelligent fire low-speed inspection cabinet

1、 Product Overview:

The fire water supply equipment is a basic component of the fixed fire water supply system. Although this part does not account for a high proportion of the cost of the entire building's fire protection system (usually less than one percent), countless experiences and lessons have proven that the success of initial fire suppression mainly depends on the integrity of this part of the equipment. The characteristic of fire water supply equipment is that it is not used normally or even for a long time, and once used, it needs to play a role. At present, the phenomenon of water pumps rusting and dying due to long-term disuse of fire-fighting equipment is very common (reaching 70 percent or even 80 percent in some areas). In response to this phenomenon, the Ministry of Public Security has formulated the mandatory document "Performance Requirements and Experimental Methods for National Fixed Fire Water Supply Equipment" GA30.2, which clearly requires that fire equipment must have automatic inspection function.

2、 Product Features:

Inspection of water pump equipment: Low speed inspection should not apply pressure to the pipeline system, drive the motor to prevent rusting and death of the water pump.

Electrical inspection content: monitoring of the main circuit of electrical appliances, power supply voltage, current, phase loss, insulation resistance, withstand voltage, etc

3、 Product features:

1. During the inspection, if a fire occurs, the inspection will be immediately stopped and the fire pump will be instantly started.

2. Fully functional, it can complete low-speed and pressure free inspection of the fire main circuit and fire water pump.

3. It has overvoltage, overcurrent, short circuit, and phase loss protection.

4. When a fault occurs during inspection, the automatic inspection device will sound and light an alarm. It has a data memory function to complete the transient parameter memory during the fault, which is convenient for maintenance and analysis.

5. The inspection operation parameters can be displayed through the interface.

6. It has an upper level telephone alarm function.

7. The equipment is equipped with a reserved RS485 communication interface, which can remotely transmit the operating status of building automation.