VIP member
Digital display super constant temperature water bath (external circulation)
Brief description: The super constant temperature water bath is a tool that adds water circulation and cooling functions to the water bath pot, which
Product details
| HH-501 Super Constant Temperature Water Bath Pot (Digital Display) (External Circulation)Product Introduction
HH-501 Super Constant Temperature Water Bath Pot Safety instructions before use1. Before using this product, please read all the instructions carefully. Our factory will not be responsible for any adverse consequences caused by operating without following the instructions. 2. The water tank should be filled with an appropriate amount of clean tap water, and the heating pipe should be at least 5CM below the water surface. 3. When the water in the studio evaporates and the water level is below the minimum level, an appropriate amount of water should be added in a timely manner. 4. The electrical rated parameters of the power socket provided by the user should be greater than the electrical rated parameters of the machine and have good grounding measures. 5. When using this machine at high temperatures, do not directly touch the upper part of the instrument to avoid burns. 6. The operating environment of this machine should be well ventilated. 7. Damaged wires, plugs or electrical equipment failures should be repaired by professional personnel. Using accessories not recommended by the manufacturer may cause certain quality issues. 8. Those with children should be strictly monitored. 9. When replacing a fuse, be sure to cut off the power first Instructions for using HH-501 super constant temperature water bath 1. Inject an appropriate amount of clean tap water into the water tank. 2. Turn the temperature control knob to the lowest position (gradually increase the temperature from left to right). 3. Insert the local power plug into the power outlet and turn on the power switch. 4. Place the control switch in the "Settings" section, and the temperature displayed on the screen will be the set temperature. Adjust the knob to set it to the desired temperature for your work. (The working temperature you set should be higher than the ambient temperature. At this time, the machine starts heating up and the yellow indicator light is on. Otherwise, the machine will not work.) 5. Place the small switch of the control part on the "measurement" end, and the temperature displayed on the screen will be the actual temperature of the water in the water tank. As the water temperature changes, the displayed number will also change accordingly. 6. When heated to the desired temperature, the heating will automatically stop and the green indicator light will turn on; When the heat inside the water tank dissipates below the temperature you set, a new round of heating will begin. 7. If uneven water temperature is found, you can turn on the mixing function and slowly adjust the mixing knob to allow automatic circulation inside the box. 8. The machine is strictly prohibited from being used without anyone for a long time to prevent the heating tube from bursting after the water tank evaporates. 9. After finishing the work, set the temperature control knob to the lowest value and cut off the power. 10. If the water bath is not used for a long time, the water in the water tank should be drained completely, Wipe clean with a soft cloth and let it dry. | |||||||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-