Used for monitoring sealed containersSF6The density of gas can be displayed on-site,At the same time, it canRelying on outputSF6 gas density signal for remote monitoring and surveillanceSuitable for monitoring medium voltage systems, it can provide various solutions such as supporting new substations and intelligent transformation of existing substations.
SF6Gas insulated ring main unit
SF6Gas insulated switchgear
1. Equipped with temperature compensation device for higher measurement accuracy
2.haveRS485Remote transmissionFunction, convenientremotemonitor
3. Suitable for different installation needs indoors and outdoors
4. selectAISI 304Stainless steel made sealed case
5. selectAISI 316Stainless steel made pneumatic connection components
6. The on-site display values and output signals are not affected by external factors such as altitude
Technical Parameter
1. Shell diameter:64mm
2. Measurement range:1.0 ~ 2.0 bar abs.
3. Measurement accuracy: (Depending on the measurement range, andSF6For gaseous state)
a)20°C: 1.0level,perhaps1.5level
b)-40°C ~+ 60°C: 2.5level
4. Protection level:IP65
5. Working temperature: -40°C~ +60°C,relative humidity≤ 95%RH
6. Leakage rate: ≤1×10-9Pa·m3/s (Helium leak detection)
7. Interface size:M24×1.5(Can)Customized)
8. Installation method: radial or axial
9. Weight: 0.3kg
Main electrical performance indicators and specifications for remote transmission
lWorking voltage:DC 24V
lpower waste:<>
lCommunication method:RS485
lCommunication protocol:ModBus RTU
lTransmission speed:9600bps
lanti-electromagnetic interferenceIEC61000-4-2:4level(15kV)
IEC61000-4-3:3level(10V/m)
IEC61000-4-4:4level(4kV)
IEC61000-4-5:3Grade(+/-2kV)
IEC61000-4-6:3Grade(10V)
IEC61000-4-8:5Grade(100A/m)
measuring range
operation temperature
Outgoing method and cable length
installation direction
High altitude environment use
detectableSF6、Air、N2、SF6+N2Waiting for gas