directional control valve | |||||
![]() |
|
||||
![]() |
Parker D1VW-8W series electric directional valveThe Parker D1VW-8W series electric directional valve is a direct acting four-way high-performance valve. It has 2 or 3 reversing positions. This valve is suitable for plate and connecting bottom plate pipe installation, with interfaces in accordance with DIN 24340 A6. This valve has high circulation rate, long lifespan, high efficiency, and low energy consumption. The application range of D1VW-8W valve is in the machine tool industry, especially in multi station automatic production lines that use many valves. Due to the low current consumption (<0.5A) and the M12 × 1 structure on the electromagnet, it can be directly connected to PLC (Programmable Logic Controller) or Bus knot (Field Bus). Parker provides a suitable solution for decentralized and standardized installation technology (DESINA) in the machine tool industry. |
||||
![]() |
Parker D1VW series soft directional electromagnetic directional valveThe Parker D1VW series soft directional solenoid directional valve is a 3-chamber, electrically controlled, 3-position 4-way or 2-position 4-way slide valve directional valve. Directly operated through a wet electromagnetic coil with a threaded iron pipe. The soft switching of the valve is achieved by buffering the armature through a damping hole in the armature pipe. |
||||
![]() |
|
||||
![]() |
Parker D1VW/D1DW series electric induction position control electromagnetic directional valveThe Parker D1VW/D1DW series electrically operated position control solenoid directional valve is a 2-position 4-way directional valve that is directly operated by an electromagnet and can be used as a monitoring valve. It is possible to selectively monitor the initial or final position. Only single solenoid valves can be used for position control. The reliable position of the reversing valve during power outage is the initial position, which is maintained by a reset spring. |
||||
![]() |
The Parker D3W series 3-chamber electric directional valve is a 3-chamber, electrically controlled, 3-position 4-way or 2-position 4-way slide valve directional valve that is directly operated by a wet directional solenoid with a threaded iron pipe. |
||||
![]() |
|
||||
![]() |
|
||||
![]() |
The Parker D1VP series hydraulic directional valve is a type of hydraulic 3-position 4-way or 2-position 4-way slide valve directional valve. The operation of the valve can be selected to be achieved through the control oil flow channels X and Y on the connecting block, or directly connected to the external control oil pipeline on the valve body. |
||||
![]() |
|
||||
![]() |
Parker D4P/D9P/D11P series hydraulic directional valveThe Parker D4P/D9P/D11P series hydraulic directional valve is a hydraulic 3-position 4-way or 2-position 4-way slide valve used to control the direction of oil flow. The main sliding valve core changes the pressure of the control oil from the X and Y ports to the required position and is held in place by a positioning mechanism or spring. The control of oil pressure and flow rate has a significant impact on the directional performance of the main sliding valve core. The minimum control oil pressure of the valve must be ensured under any working conditions. |
||||
![]() |
The Parker D1VC/D1VD series mechanical directional valve is a 3-chamber, 2-position, 4-way slide valve directional valve, which is mechanically directional through a roller push rod. |
||||
![]() |
The Parker D1DL series manual directional valve is a 5-chamber 3-position 4-way or 2-position 4-way slide valve directional valve. Valves are reversed through a handle. The handle can be selected at the A or B end, and the valve core adopts a spring centering and card slot positioning structure. The handle type directional valve is resistant to seawater. |
||||
![]() |
The Parker D3DL series manual directional valve is a 5-chamber 3-position 4-way or 2-position 4-way slide valve directional valve. Valves are reversed through a handle. The handle can be selected at the A or B end, and the valve core adopts a spring centering and card slot positioning structure. The handle type directional valve is resistant to seawater. |
||||
![]() |
The Parker D4L/D9L series manual directional valve is a 5-chamber 3-position 4-way or 2-position 4-way slide valve directional valve. Valves are reversed through a handle. The handle can be selected at the A or B end, and the valve core adopts a spring centering and card slot positioning structure. The handle type directional valve is resistant to seawater. |
||||
![]() |
The Parker D3/D4/D8/D9/D11 series pilot operated solenoid directional valve is a sliding spool type pilot operated directional valve used to control the direction of oil flow. The main sliding valve core changes the pressure of the control oil to the required position and is held in its position by a stop mechanism, positioning mechanism, or spring. The control of oil pressure and flow rate has a significant impact on the directional performance of the main sliding valve core. To ensure reliable reversing, the corresponding control oil flow must be selected during use. The minimum control oil pressure of the valve must be ensured under any working conditions. |