Crude oil water centrifugeMain technical parameters:
1. Power supply: AC 220V 50HZ
2. Overall power: 2500W
3. Speed: 0-4000 revolutions per minute
4. Centrifugal tube capacity: 28x10ml, 4x100ml, 8x50ml, 16x20ml
5. Relative centrifugal force: 3850xg
6. Temperature range: Room temperature -70 ℃
7. Environmental temperature: -20 ℃ -40 ℃

Crude oil water centrifugeUsage: First, add the substance to be separated into the centrifuge tubes provided with this machine, and insert them into the centrifuge head holes separately (but the amount of substance added to each centrifuge tube must be equal). In order to prevent the glass centrifuge tubes from breaking during high-speed operation, adjust the weight of each centrifuge tube. It is necessary to add 25-30ml of aqueous solution into the aluminum alloy rotor hole (the hole where the glass centrifuge tube is inserted). Cover the machine, turn on the power, press the selection button, use ▲▼ to select the speed and working time you need, then press the approval button to confirm, and then press the start button. At this point, the centrifuge enters the working state. Within the speed range of 0-4000 revolutions per minute, you can choose according to your actual needs. The temperature is controlled by digital display, with a maximum temperature of 99.9 ℃ and a temperature accuracy of ± 1 ℃

matters needing attention.
1. It is strictly prohibited for any liquids or other debris to enter the centrifuge chamber. Otherwise, it will damage the host
2. The instrument casing should be properly grounded.
Please do not open the upper cover of the centrifuge head when it is running at high speed..
4. The power supply must meet the voltage requirements of this product, and the power socket should use a three hole safety socket,
5. If there is a quality problem with this product within one year, it can be repaired free of charge. Any damage caused by improper use of this product is the responsibility of the user.

Repair and accessories: If eccentricity is found during the use of this instrument, please have professional staff repair it. First, open the bottom cover, check if the motor support is eccentric, and adjust it accordingly. If there are any other situations, please notify our unit for repair.