Sponge foam cutting machine (laboratory specific)

GCPQ-100

skill

art

square

table

book

Beijing Guance Jingdian Instrument Equipment Co., Ltd

GCPQ-100

Sponge foam cutting machine (special for laboratory)

Product image:

Sponge foam cutting machine (special for laboratory)

GCPQ-100

1 Main application scope and functions

This machine is mainly used for cutting foam materials. It can cut hard foam, soft foam and plastic into squares, rectangles and strips. It has the advantages of high cutting efficiency, accurate cutting size and high degree.

2、 Main technical requirements:

1. Cutting display resolution: 0.01mm

2. Cutting size accuracy: ± 1mm

3. Workbench size: 1000 × 700mm (can be customized according to user needs)

4. Workbench and baffle material: 304 brushed stainless steel

5. The effective travel of the movable workbench is 500mm

6. Minimum cutting size: 25 × 25 × 10mm

7. Maximum cutting thickness: 400mm

8. Equipment power supply voltage: 220V/50Hz

9. Vacuum cleaner power supply voltage: 220V/50Hz

10. Equipment power: 2.2KW

11. Blade circumference: 4 meters

3、 Structural features:

1. This machine is suitable for cutting soft materials such as sponges and foams

2. Easy to operate and learn, beginners and ordinary workers can operate immediately

3. There is no unevenness in the cutting surface caused by uneven material

4. The various blades of the machine come into contact with the wheel, and wear-resistant rubber is used to eliminate noise, so the noise during machine operation is low.

5. Due to the use of shock absorbers in this machine, the durability of the cutting tools is better than other manufacturers' products.

When sharpening the knife on this machine, there is no need to remove the knife, it can be directly sharpened on the machine.

7. Due to the ability to translate the entire working surface, this machine improves work efficiency and adds a reference surface, standardizing the cutting dimensions of materials.

8. The machine is equipped with a movable cutting and sizing device. To ensure the accuracy of cutting dimensions, a digital display ruler is equipped.

9. The movable workbench adopts negative pressure adsorption to fix the cut foam.

Sharpening device

When the equipment is used for a long time, the sharpness of the blade decreases. This can be achieved by using a sharpening device installed on the equipment to grind the blade and keep it sharp at all times.

Tension adjustment device with knife

4、 Main equipment configuration

1. One experimental host

2. One set of control system

3. One set of adsorption device

4. One digital ruler

5. Drive motor one

6. One cutting blade (additional piece)

7. Grind a blade of grinding wheel

8. One set of vacuum cleaner