VIP member
Closed drying line
Closed drying line Closed drying line Rotary drying line Performance characteristics: The rotary drying line is mainly composed of supporting devices,
Product details
Closed drying line
Closed drying linePerformance characteristics of rotary drying line:
The rotary drying line is mainly composed of supporting devices and sealing rings. It has the advantages of reasonable structure, excellent production, high output, low energy consumption, and convenient operation. Rotary drying lines are generally suitable for granular materials and can also be used to dry sticky paste like materials or materials with high moisture content by partially adding materials. Its advantages include high production capacity, wide applicability, low flow resistance, large allowable fluctuation range in operation, and convenient operation.
Performance characteristics of infrared drying line:
Infrared radiation has penetrating power and can heat both inside and outside simultaneously. The general heating method involves the transfer of heat from one end of the object being heated to the other or gradually from the surface of the object to its interior. Therefore, the object being heated may experience uneven heating, slow heating process, low efficiency, and unsatisfactory results. Infrared radiation can heat both inside and outside, so the heated object can be uniformly heated. Therefore, while achieving the expected drying requirements, it can ensure and enhance the quality of the desired drying object.
2. The infrared tunnel furnace is heated internally, and due to the absence of surface film, it can increase efficiency by 2-3 times or more, thereby achieving energy-saving effects;
3. production lineShorter, due to high heating and drying efficiency, it only takes a few tens of minutes to complete, thus saving space and shortening the production process. Save labor and factory labor costs. Shortening the heating time means energy conservation, and achieving this is an effective way to save energy.
4. It can be synchronously controlled to reduce the defect rate. The heating equipment can be synchronously controlled with the production line to reduce the deformation or foaming of products caused by continuous heating in the furnace due to line shutdown. The heating equipment can emit heat radiation within 1-2 seconds to achieve the heating effect. When the production line stops, the heating can be immediately released to avoid product defects.
5. It can be segmented for control, increasing applicability and achieving uniform temperature Stable and clean heating process. Easy temperature control, rapid heating, and relatively safe; The infrared tunnel furnace has low thermal inertia, does not require warm-up, saves manpower, and saves costs for enterprises.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-