1、 Product Introduction

This temperature sensor is used for charging stations and adopts a high-precision single ended glass sealed thermistor chip to measure temperature accurately; Spring expansion structure, using force contact, high and low temperature impact product resistance does not float, all materials are acid and alkali resistant, salt spray testedNo abnormalities within 72 hours.

2、 Product Features

1. Wide temperature measurement range: -30 ℃~200 ℃, stable resistance and small measurement error during long-term operation.

2. It is assembled and riveted using R25=10K ± 0.5% high-precision radial glass sealed thermistor chip, stainless steel, thermal conductive silicone grease, etc., which makes temperature measurement more sensitive and temperature control more accurate. The resistance value of cold and hot shock does not float, and the service life is longer.

3. The hardware shell has a riveted telescopic structure, easy installation, force contact, and precise temperature measurement.

4. Waterproof rating: IP65

5. Humidity sensitivity level: 1A level

6. Applicable to: new energy vehicle charging stations.

7. The size can be customized and the parameters support customization. Welcome to consult customer service.

3、 Product parameters

1. Resistance value of resistor:R25=10KΩ±0.5%(Customizable)

2B value：3950K±1%(Customizable)

3Working temperature range:-30℃~200℃

4Thermal time constant:about5second(In)airChinese)

5Voltage resistance:AC=2500V*1mA*60sNo breakdown or flicker phenomenon

6Insulation resistance:DC=500V resistor 100MΩ or above