The cast iron deflectometer product is designed to be aesthetically pleasing and innovative, mainly used for detecting radial, circular, and end face circular runout of shaft and disc components, with high precision and convenient operation.

The cast iron deflectometer is made of HT250 (clay sand or resin sand) and has a beautiful and elegant workmanship.

Usage: Tighten the eccentric shaft handle, first fix the fixed seat on the instrument base. Fix the movable seat in the appropriate position according to the length of the tested part. Press down on the ball handle, insert the component, and use two supports to hold the center hole of the component. Tighten the grip tightly to secure it in place. Place the activity watch stand in the desired position. To carry out the testing work, it is necessary to cooperate with the percentage wheat (thousand wheat).

Equipment for cast iron deflectometer: Indicator: torsion spring gauge, dial gauge, dial gauge

Main technical parameters of cast iron deflectometer:

1、 Measure lengths of 300mm, 500mm, 1000mm, 1500mm

2、 Radial circular runout of Mohs cone 2 at 60 ° angle ≤ 0.005mm

3、 The parallelism of the axis to the guide rail within a range of 100mm (horizontal and vertical directions) is ≤ 0.006mm

4、 The large diameter of the tested part is 270mm-460mm

The main technical parameters of the cast iron deflectometer are that the radial circular runout of the Mohs 2 60 ° cone surface to the Mohs cone is ≤ 0.005mm; The parallelism of the axis to the guide rail within a range of 100mm (horizontal and vertical directions) is ≤ 0.006mm; The large diameter of the tested part is 270mm; Measure lengths of 300mm, 500mm, 1000mm, 1500mm, and 2000mm.