VIP member
Cable type float level switch/st-m15 cable type float switch
Product Overview: The MS-UQX cable type float level switch adopts a high sealing performance float switch
Product details
product overview
The MS-UQX cable type float level switch adopts a high sealing performance float switch. This product is suitable for controlling the operation of liquid pumps, adjusting liquid levels, and can also be installed in submersible pumps to control and protect electric motors. High sealing performance is ensured by injecting polypropylene.
The MS-UQX cable float level switch is a switch that can adjust the liquid level in barrels, tanks, or wells. It can be automatically adjusted, easy to operate, convenient to install, safe and reliable, maintenance free, non-toxic and environmentally friendly. It has a resistance effect on sewage and is widely used in water tanks, oil, acid and alkali tanks, barrels, tanks, irrigation containers, etc. in households, factories, mines, etc.
The MS-UQX cable type float level switch is designed based on the principles of gravity and buoyancy, with a simple and reasonable structure. It mainly includes a floating body, a large capacity micro switch set inside the floating body, a driving mechanism that can turn the switch on and off, and a three core cable connected to the switch.
Main technical indicators
1. Working voltage: 250V.
2. Working current: 8A.
3. Working temperature: 0-80 ℃.
4. Electric lifespan: 1 × 100000 cycles.
5. Mechanical lifespan: 5 × 100000 cycles.
Installation instructions
Water supply system
Use "black" and "blue" wires:
When the float is at the lower water level, the contact is in the connected state
When the float is at the upper water level, the contact point is not connected
drainage system
Use "black" and "brown" wires:
When the float is at the upper water level, the contact is in a connected state
When the float is at the lower water level, the contact point is not connected
drainage system
Use "black" and "brown" wires:
When the float is at the upper water level, the contact is in a connected state
When the float is at the lower water level, the contact point is not connected
The installation method of heavy hammer
1. MS-UQX modelCable type float level switchAfter the wire passes through the concave circular hole in the center of the heavy hammer, gently push the hammer to make the plastic ring embedded above the circular hole fall off due to the pushing force of the wire head. If necessary, you can also use a screwdriver to remove this plastic ring, and then put the detached plastic ring on the cable to set the water level as you want with a weight hammer.
2. Gently push the hammer to pull out the cable until the center of the hammer grips the plastic ring. As long as the heavy hammer is lightly fastened in the plastic ring, it will not slip off. If the plastic ring is damaged or lost, it can be replaced by fastening the same light bare copper wire into the cable.
The heavy hammer is a required accessory. Please pull the cable directly to the control box and avoid using intermediate joints as much as possible. If there is a joint due to necessity, never immerse the cable joint in water.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-