1、 Performance range of CZ type chemical pump (according to design points)

Flow rate: Q 1.6-1500m ³/h

Head: H 5-125m

Work pressure: P is less than or equal to 1.6MPa

Working temperature: t -20 to+150 degrees Celsius

2、 CZ type chemical pump is suitable for industries

Chlor alkali and soda ash industries; Medicine, fertilizers, pesticides; Petrochemical, chemical fiber, paper industry; Dye industry; Environmental engineering and water treatment system.

3、 Structural form of CZ type chemical pump

Horizontal rear opening door structure, pump head and motor connected by coupling, installed on the bottom plate, impeller with rear opening, three bearings, shaft seal with external mechanical seal, equipped with cooling device, bearing body

Observe the oil level with a sight glass; Compact and reasonable structure. The pump has legs cast on the pump body, which can withstand the load from the pipeline and directly transmit it to the foundation, so that the pump rotor will not bend due to the load borne by the pump,

This ensures that the load-bearing and mechanical seals have the best service life. When repairing, there is no need to open the pipeline connected to the pump body. Just open the bolts between the bracket and the pump body, and separate them to repair the impeller

And mechanical seal, simple and convenient.

Pump rotation direction: When viewed from the motor end towards the pump, rotate clockwise.

4、 Characteristics of CZ type chemical pump

This series of pumps is developed by our company through the introduction of advanced foreign technology. It can transport media containing solid particles that are easy to crystallize, and is resistant to temperature, corrosion, and blockage. The material can be selected according to specific working conditions.

5、 Sealing type

Mechanical seal or packing seal.