The CQB-F corrosion-resistant fluoroplastic magnetic pump (fluorine lined magnetic pump) adopts magnetic coupling transmission, without dynamic sealing points, thus completely eliminating the phenomenon of running, emitting, dripping, and leaking at the shaft seal of general shaft driven centrifugal pumps. The overcurrent components are made of fluoroplastic industrial ceramics, which have excellent corrosion resistance and sealing properties, no aging, and no toxin decomposition. The CQB-F fluorine lined magnetic pump body is made of cast iron, and the overcurrent components are magnetic driven pumps made of fluoroplastics (FEP, PTFE, ETFE, PVDF, fluoroplastic alloys). Also known as fluorine lined magnetic pumps, fluoroplastic magnetic pumps can transport corrosive media such as acids, alkalis, oxidants, etc. of any concentration (strength).

The CQB-F fluorine lined magnetic pump has a compact structure, beautiful appearance, small volume, low noise, reliable operation, and easy use and maintenance. It can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, film photography and printing, and scientific research institutions. National defense industry and other units pump acid, alkali solution, oil, rare and valuable liquid, venom, volatile liquid, as well as supporting equipment for circulating water and filter machines. Especially for the pumping of liquids that are prone to leakage, flammable, and explosive, this pump is more ideal.

The design of CQB-F corrosion-resistant fluoroplastic magnetic pump (fluorine lined magnetic pump) not only has the advantages of compact structure, beautiful appearance, small volume, low noise, and reliable operation of ordinary magnetic pumps, but also all its overcurrent components are made of the world's excellent corrosion-resistant 'Plastic King' (fluoroplastic), and the isolation sleeve is made of special materials, which have high-strength mechanical properties and eliminate the magnetic eddy current phenomenon of ordinary magnetic pumps. Therefore, fluoroplastic magnetic pumps can transport corrosive media such as acids, alkalis, oxidants, etc. of any concentration (strength) without damage. The leak proof design eliminates the shaft seal and uses magnetic coupling to indirectly drive, completely eliminating the trouble of dripping and never polluting the usage site.

Classification: Currently, the fluoroplastic magnetic pumps produced by domestic manufacturers mainly include CQB fluoroplastic magnetic pumps, ZMD fluoroplastic self-priming magnetic pumps, IMD fluoroplastic magnetic drive pumps, etc. Due to the use of 'fluoroplastic alloy' for the overcurrent part of the pump. It can continuously transport corrosive media such as acids, alkalis, and strong oxidants of any concentration without damage. The CQB-F fluoroplastic magnetic pump has a unique design that does not require mechanical shaft seals and does not leak. The liquid flow components are made of fluoroplastics, ceramics, fluororubber, and other materials. The pump body shell is fixed with metal materials, so the pump body is sufficient to support the weight of the pipeline, for ease of use and maintenance.

CQB-F corrosion-resistant fluoroplastic magnetic pump (referred to as fluorine lined magnetic pump) is a chemical process pump that applies modern magnetic mechanics principles and uses permanent magnets to achieve non-contact indirect transmission. When the motor drives the outer rotor (i.e. outer magnetic steel) assembly to rotate, the magnetic field lines pass through the isolation sleeve and drive the inner rotor (i.e. inner magnetic steel) assembly and impeller to rotate synchronously through the magnetic field. The medium is completely enclosed in the stationary isolation sleeve, thus achieving the goal of leak free pumping of the medium and completely solving the shaft seal leakage of mechanical transmission pumps. It is a new type of industrial pump that is fully sealed, leak free, and pollution-free.

1	structural diagram	2	Imported flange	3	Pump body liner	4	static ring
5	power and environment monitoring system			6	Impeller and internal magnetic steel assembly	7	sealing ring
8	bearing	9	pump shaft	10	External magnetic steel assembly	11	thrust ring
12	Isolation sleeve	13	Connecting frame

Technical Specifications	model		Caliber (mm)	Flow rate (m ³/h)	Head (m)	Motor power (kW)	voltage
	(V)	material
Import	15	15	1.8	8	0.12	Export	CQB15-10-85F 220/380 gather partial two fluorine
B	25	18	3	12	0.37	alkene
CQB20-15-105F	32	25	3.2	20	0.75	380
220/380	32	25	3.2	25	0.75	380
CQB32-25-125F	40	32	6.3	15	0.75	380
CQB32-25-145F	40	32	6.3	25	1.5	380
CQB40-32-115F	40	32	6.3	32	2.2	380
CQB40-32-145F	50	40	12.5	20	2.2	380
CQB40-32-160F	50	40	12.5	32	3	380
CQB50-40-125F	65	50	25	20	3	380
CQB50-40-160F	65	50	25	32	5.5	380
CQB65-50-125F	80	65	50	20	7.5	380
CQB65-50-160F	80	65	50	32	11	380
CQB80-65-125F	100	80	100	20	11	380
CQB80-65-160F	100	80	100	32	18.5	380
CQB100-80-125F

performance curve graph
Installation, use and maintenance
1. Before using the pump, it should be checked that the motor fan blades rotate flexibly, without jamming or abnormal noise, and all fasteners should be tightened.
2. After starting the CQB-F fluorine lined magnetic pump motor, slowly open the discharge valve. After the pump enters normal working condition, adjust the discharge valve to the desired opening.
3. The CQB-F fluoroplastic magnetic pump should be installed horizontally and not vertically. The pump body should not bear the weight of the pipeline. For special requirements for vertical installation, the motor must face upwards.
4. Check if the rotation direction of the CQB-F fluorine lined magnetic pump motor is consistent with the direction mark of the magnetic pump.