Overview of Beating Vibration Screen

The tapping type vibrating screen is sometimes called a tapping type standard vibrating screen and is often used as a testing instrument in laboratories. The tapping vibrating screen is mainly composed of three parts, namely the machine base, screening equipment, and transmission device. The tapping vibrating screen can also be equipped with various fixtures, which are flexible and firm in clamping, and can achieve automatic shutdown.

The tapping vibrating screen (tapping vibrating screen instrument) can screen various characteristic materials and is suitable for checking the particle size composition of ordinary abrasives, grading and particle size composition of superhard materials. It is also widely used in scientific research, production, laboratories of geology, metallurgy, abrasives, powders, chemical industry, construction cement, medicine, national defense and other departments to screen and test materials. It is especially suitable for the production grading process of diamond micro powder and superhard materials industry, and can be repeatedly used with high strength and high frequency.

The tapping type vibrating screen is sometimes called a tapping type standard vibrating screen and is often used as a testing instrument in laboratories. The tapping vibrating screen is mainly composed of three parts, namely the machine base, screening equipment, and transmission device. The tapping vibrating screen can also be equipped with various fixtures, which are flexible and firm in clamping, and can achieve automatic shutdown.

Structural principle of tapping vibrating screen

The Φ 200 tapping screen motor rotates the main shaft through gear shifting, and the main shaft drives the eccentric wheel to drive the sliding plate to shake the test screen left and right. At the same time, it drives the top rod gear to rotate, tapping the hammer and tapping the test screen. This achieves the purpose of dividing the material in the screen according to the test screen mesh at a certain vibration frequency.
The tapping type standard vibrating screen machine is mainly composed of a machine base, a screen, and a transmission mechanism. This tapping screen can be equipped with specialized fixtures, which can be used to clamp the Φ 200 test screen, as well as the Φ 75 and Φ 100 sets of screens. The clamping is convenient and flexible, the clamping is firm, and it can automatically shut down.

Main parameters of tapping vibrating screen

Precautions for tapping vibrating screen

1. Adjust the lifting bracket and activate the butterfly nut.
2. Pay attention to keeping the oil film on the flat surface of the box cover intact to avoid rust spots.
3. Regularly pay attention to the lubrication of moving parts and add oil regularly to extend their service life.
4. The whole machine must be installed in a fixed position to reduce shaking.

Usage method of tapping vibrating screen

1. Before starting up, it is necessary to add 10 kilograms of oil and pay attention to whether the direction of the arrow shown on the motor housing is consistent. Reverse rotation is prohibited.
2. The equipment must be fixed before operation.
3. Place the sieve with the sample on the lower sieve plate, adjust the lifting bracket to tightly clamp the sieve between the sieve plate and the lower sieve plate
4. Insert the motor plug into the controller socket and the power cord into the three-phase socket.
5. Press the power switch and set the time. According to user needs, press the touch key "△" to increase, press "▽" to decrease, and each press of "△" and "▽" is 60 seconds.
6. After setting the required time according to the test procedure, press the ON button to start working mechanically, and the indicator light will light up during operation.
7. When this instrument is working normally, if it needs to be stopped, press the OFF button.
8. Each shutdown should reset the time.
9. Attention: Do not frequently turn on or off the machine during use, and cut off the power after turning it off

Technical parameters of the tapping vibrating screen model